Getting Started Guide
1 Page
![Getting started INVOS™ 7100 regional oximetry monitor Adult and pediatric quick start guide 1 4 Power on Press Power button on the top right of the tablet. 6 Apply sensor Place up to four sensors on the patient; then connect the nondisposable RSC cables to the sensors. 2 Adult sensors Pediatric sensors Start monitoring Once sensor readings appear on screen, press New Data Set button to continue. 7 Connect preamplifier Plug up to two preamplifiers into the dock on the back panel of monitor. 3 5 Attach sensor cable Connect up to two non-disposable RSC cables to the preamplifier. Check sensor placement Look for the blue light on the cable to confirm cable and sensor are properly placed. From this screen you can drag the sensor location to match where the sensors were placed on the patient by pressing and holding the white circles. ©2022 Medtronic. Medtronic, Medtronic logo, and Engineering the extraordinary are trademarks of Medtronic. All other brands are trademarks of a Medtronic company. 10/2022 – US-PM-2200536 – [WF#5705304] 6135 Gunbarrel Avenue Boulder, CO 80301 800.635.5267 medtronic.com/covidien Set a baseline Tap Menu icon on the top left to locate Set Baselines button; select this option to set a baseline immediately. Then select Retake All Baselines.](https://public.bioclinicalservices.com.au/library/representations/proxy/eyJfcmFpbHMiOnsiZGF0YSI6MTg3NTM0LCJwdXIiOiJibG9iX2lkIn19--8d711719aed2e7f3a4ec1c70562efbbb14f42dcc/eyJfcmFpbHMiOnsiZGF0YSI6eyJyZXNpemUiOiIzMjB4In0sInB1ciI6InZhcmlhdGlvbiJ9fQ==--4214356078d1f110e449cda512a9432562da3e70/invos-7100-oximeter-quick-start-guide.pdf.png)
Preview
Page 1
Getting started
INVOS™ 7100 regional oximetry monitor Adult and pediatric quick start guide 1
4
Power on
Press Power button on the top right of the tablet.
6
Apply sensor
Place up to four sensors on the patient; then connect the nondisposable RSC cables to the sensors.
2
Adult sensors
Pediatric sensors
Start monitoring
Once sensor readings appear on screen, press New Data Set button to continue. 7
Connect preamplifier
Plug up to two preamplifiers into the dock on the back panel of monitor. 3
5
Attach sensor cable
Connect up to two non-disposable RSC cables to the preamplifier.
Check sensor placement
Look for the blue light on the cable to confirm cable and sensor are properly placed. From this screen you can drag the sensor location to match where the sensors were placed on the patient by pressing and holding the white circles.
©2022 Medtronic. Medtronic, Medtronic logo, and Engineering the extraordinary are trademarks of Medtronic. All other brands are trademarks of a Medtronic company. 10/2022 – US-PM-2200536 – [WF#5705304]
6135 Gunbarrel Avenue Boulder, CO 80301 800.635.5267
medtronic.com/covidien
Set a baseline
Tap Menu icon on the top left to locate Set Baselines button; select this option to set a baseline immediately. Then select Retake All Baselines.