Panda and Giraffe Warmer Family Service Manual Rev U

Service Manual

Legal notices GE HealthCare will make available on request such circuit diagrams, component diagrams, component parts lists, descriptions, calibration instructions, or other information that will assist the users or appropriately qualified technical personnel to repair those parts of the equipment that are classified by GE HealthCare as repairable. General Electric Company reserves the right to make changes in specifications and features shown herein, or discontinue the product described at any time without notice or obligation. Contact your GE HealthCare representative for the most current information. Panda and Giraffe are registered trademarks owned by Datex-Ohmeda, Inc. GE and GE Monogram are trademarks of General Electric Company used under license. All other company and product names mentioned may be trademarks of the companies with which they are associated.

Masimo Possession or purchase of this device does not convey any express or implied license to use the device with unauthorized sensors or cables that would, alone, or in combination with this device, fall within the scope of one or more of the patents to this device. Masimo Patents: www.masimo.com/patents.htm

Revision history Rev

Revision date

Description

U

2023

Updated contents for RS-232 Datalink features and related checkout procedures.

T

2022

Add cleaning and disinfection for tubing management arm and updated specification of procedure light.

S

2021

Added reusable temperature probe to Accessories section.

R

2020

Service manual conversion to content management system and incorporation of addenda – Class A.

Language Policy DOC0371395 - Global Language Procedure ПРЕДУПРЕЖ ДЕНИЕ (BG)

Това упътване за работа е налично само на английски език. • Ако доставчикът на услугата на клиента изиска друг език, задължение на клиента е да осигури превод. • Не използвайте оборудването, преди да сте се консултирали и разбрали упътването за работа. • Неспазването на това предупреждение може да доведе до нараняване на доставчика на услугата, оператора или пациентa в резултат на токов удар, механична или друга опасност.

警告

本维修手册仅提供英文版本。

(ZH-CN)

• 如果客户的维修服务人员需要非英文版本，则客户需自行提供翻译服务。 • 未详细阅读和完全理解本维修手册之前，不得进行维修。 • 忽略本警告可能对维修服务人员、操作人员或患者造成电击、机械伤害或其他形式的伤 害。

M1128921 Revision U

Panda Warmer Family and Giraffe Warmer

3/331

Service Manual

Contents

Contents Legal notices...3 Revision history ...3 Language Policy...3 Chapter 1 Introduction ... 17 1.1 Scope ...17 1.2 Intended users...17 1.3 User responsibility ...17 1.4 Introduction...17 1.4.1 Freestanding and wall-mount warmer ...19 1.4.2 Resuscitation system ...20 1.5 Features ...21 1.5.1 Heater head and radiant heater ...21 1.5.2 Optional integrated SpO2 and resuscitation modules...21 1.5.3 Hands Free Alarm Silence ...21 1.5.4 ResusView™ Heart Rate (HR) option ...21 1.6 Mechanical controls, cable connections, and features ...22 1.7 Display and display controls...26 1.7.1 Identifying the SpO2 system...28 1.7.1.1 Nellcor SpO2 display...29 1.7.1.2 Masimo SpO2 display ...31 1.7.2 T-piece resuscitation system controls and connections ...32 1.7.3 T-piece resuscitation system components ...34 1.7.4 Bag and Mask resuscitation system controls and connections ...37 1.7.5 Bag and Mask resuscitation system components ...39 1.7.6 Heart Rate display and controls ...40 1.8 Abbreviations and acronyms ...41 1.9 Illustrations...42 1.10 References ...42

Chapter 2 Safety... 45 2.1 Safety definitions ...45 2.2 Important safety information ...45 2.3 Safety hazards ...46 2.3.1 Protection against electrical hazards...46 2.3.2 Protection against mechanical hazards...47 2.3.3 Protection against contamination hazards...48 2.3.4 Protection regarding functional hazards ...49 2.3.5 Protection regarding equipment hazards...51 2.3.6 Protection against fire hazards...51 M1128921 Revision U

Panda Warmer Family and Giraffe Warmer

9/331

Contents

Service Manual

2.4 Safety signs...52 2.5 Symbols displayed on the device ...52 2.6 Standards...58 2.7 Electromagnetic compatibility (EMC) guidance ...59 2.7.1 Electromagnetic compatibility essential performance...60 2.7.2 Degraded performance characteristics...60 2.7.3 Guidance and manufacturer’s declaration – electromagnetic emissions...60 2.7.4 Manufacturer’s guidance and declaration regarding electromagnetic immunity...61 2.7.5 International Electronic Commission (IEC) guidance and manufacturer’s declaration regarding electronic immunity ...61 2.7.6 Recommended separation distance between portable and mobile RF communications equipment and the system ...63

Chapter 3 Installation and service checkout... 65 3.1 Installation procedures ...65 3.1.1 Installing wall mount devices ...65 3.1.1.1 Pre-installation preparation...66 3.1.1.2 Wall mount bracket installation ...67 3.1.1.3 Bumper installation ...71 3.1.1.4 Heater head installation and heater alignment ...71 3.1.1.5 Mattress height label installation...74 3.1.1.6 Enclosure dimensional specification...75 3.1.2 Mounting universal adapter plate ...79 3.1.3 DIN rail upgrade installation instructions ...80 3.1.4 Resuscitation upgrade kit installation ...82 3.1.4.1 Upgrade instructions ...82 3.2 Service checkout procedures ...89 3.2.1 Mechanical checks ...90 3.2.2 Controller checks ...92 3.2.3 Equipment checks for optional features...94 3.2.4 Electrical safety tests ...95 3.2.4.1 Ground resistance check ...95 3.2.4.2 Earth leakage and chassis leakage current ...95 3.2.4.3 SpO2 patient lead leakage current ...96 3.2.4.4 ResusView™ Heart Rate option patient current leakage test (Panda iRes Warmers) ...96 3.2.5 Scale checkout procedures ...97 3.2.5.1 Scale hardware check...97 3.2.5.2 Visual inspection...97 3.2.5.3 Center weight check ...98 3.2.5.4 Off center weight check ...98 3.2.5.5 Load cell check...100 3.2.6 ResusView™ Heart Rate option checkout procedures (Panda iRes Warmers) ...101 3.2.6.1 HR test ...101 3.2.6.2 HR volume check ...101 3.2.7 Resuscitation system setup and checkout procedures...102 3.2.7.1 Resuscitation system gas supply connection ...102 3.2.7.2 Suction checkout ...108 10/331

Panda Warmer Family and Giraffe Warmer

M1128921 Revision U

Service Manual

Contents

3.2.7.3 T-piece resuscitation system oxygen delivery checkout...111 3.2.7.4 Bag and Mask resuscitation system oxygen delivery checkout...116 3.2.8 RS-232 Datalink checks...118 3.2.8.1 Serial Data ...118 3.2.8.2 Nurse Call ...119

Chapter 4 Calibration... 121 4.1 Scale calibration (bedded only)...121

Chapter 5 Software... 123 5.1 Service mode...123 5.1.1 Unit information...123 5.1.2 Main menu...123 5.1.3 Unit Info menu ...124 5.1.4 Operation Settings ...124 5.1.5 Scale Calibration ...126 5.1.6 Date/Time...126 5.1.7 Diagnostics ...127 5.1.7.1 Temperature ADC Diagnostics...127 5.1.7.2 VGA Diagnostics ...128 5.1.7.3 Touch Panel Buttons / Switches...129 5.1.7.4 Alarm Diagnostics ...129 5.1.7.5 Odometer Readings ...130 5.1.7.6 Event Logs ...130 5.1.7.7 Heat Engine Diagnostic...133 5.1.8 Set defaults...133

Chapter 6 Troubleshooting... 135 6.1 Troubleshooting information ...135 6.1.1 Troubleshooting definitions and acronyms ...135 6.2 Troubleshooting tables ...136 6.2.1 Lighting – procedure light...136 6.2.1.1 No Light ...136 6.2.2 Lighting – observation lights ...138 6.2.2.1 Light output flickers at lowest setting ...138 6.2.2.2 Light output dim at highest setting ...138 6.2.2.3 Lights stay dim with switch off ...139 6.2.2.4 Lights are not dimmable ...139 6.2.2.5 1 bulb does not light ...139 6.2.2.6 Both bulbs do not light ...140 6.2.3 Display – LCD and backlights...140 6.2.3.1 White display, striped display, or color shift...141 6.2.3.2 Distorted display: test or random pattern ...141 6.2.3.3 Dim or non-uniform light...141 6.2.3.4 Blank black screen (with no alarms)...141 6.2.3.5 Display arrow present after installing new LCD...142 6.2.3.6 Black background has red, green, or blue tint ...142 6.2.4 User interface – touch panel...142 6.2.4.1 Button not working...142 M1128921 Revision U

Panda Warmer Family and Giraffe Warmer

11/331

Contents

Service Manual

6.2.4.2 Cannot enter service mode ...142 6.2.4.3 Sys Fail 08 [xx xx 00 00] ...143 6.2.5 System failure – Sys Fail message ...143 6.2.5.1 Sys Fail 01 [FF xx xx xx]...143 6.2.5.2 Sys Fail 02 ...143 6.2.5.3 Sys Fail 03 ...143 6.2.5.4 Sys Fail 04 ...143 6.2.5.5 Sys Fail 05 ...144 6.2.5.6 Sys Fail 06 [0B XX 00 00]...144 6.2.5.7 Sys Fail 08 [xx xx 00 00] ...144 6.2.5.8 Sys Fail 09 [XX 80 XX XX] / [XX 10 XX XX] / [XX 50 XX XX] / [0A XX 00 00] ...145 6.2.5.9 Sys Fail 09 [0B 00 00 00] ...146 6.2.5.10 Sys Fail 09 [0E 72 00 00] ...146 6.2.5.11 Sys Fail 10 [XX XX XX XX]...147 6.2.5.12 Sys Fail 11 [xx 00 00 00] -or- [FF FF FF FF] ...147 6.2.5.13 Sys Fail 11 [AA AA AA AA] ...148 6.2.5.14 Sys Fail 11 [FF FF FF FF] ...149 6.2.5.15 Sys Fail 12 [xx 00 00 00]...149 6.2.5.16 Blank screen, alarm lights or indicator lights on, High Priority alarm ...149 6.2.5.17 Red screen, alarm lights or indicator lights flashing, High Priority alarm ...150 6.2.6 Alarms/indicators...150 6.2.6.1 No audible power fail alarm ...150 6.2.6.2 No audio indication of alarms...150 6.2.6.3 Hands Free Alarm Silence does not work ...151 6.2.6.4 Distorted audio speaker ...151 6.2.7 Electronics – patient temperature probe...151 6.2.7.1 Alarm message: “Temp Probe Failure” ...151 6.2.7.2 Alarm message: “Confirm Probe Jack Connection” ...152 6.2.8 Electronics – scale (bedded only)...152 6.2.8.1 No scale icon displayed ...153 6.2.8.2 Defective scale ...153 6.2.8.3 Scale troubleshooting symptoms ...153 6.2.9 Electronics – SpO2 ...154 6.2.9.1 No SpO2 probe detected ...154 6.2.9.2 No SpO2 option on screen...155 6.2.9.3 Oximetry system failure...155 6.2.10 Electronics – elevating base (bedded only) ...155 6.2.10.1 No motion ...155 6.2.10.2 Loss of up/down control from 1 foot switch...156 6.2.11 Electronics – heat control ...156 6.2.11.1 Heat engine failure...157 6.2.12 Electronics – power failure ...157 6.2.12.1 Device will not turn on (power fail alarm) ...157 6.2.13 Mechanical (bedded only) ...158 6.2.13.1 Bed does not tilt...158 6.2.14 ResusView™ Heart Rate (HR) option (Panda iRes bedded only) ...158 6.2.14.1 HR interface board LED message descriptions...158 6.2.14.2 Troubleshooting symptoms and fault codes...159 6.3 Troubleshooting application software 1.0.9 and earlier ...160 6.3.1 Service mode...160 12/331

Panda Warmer Family and Giraffe Warmer

M1128921 Revision U

Service Manual

Contents

6.3.1.1 Unit-specific information ...161 6.3.1.2 Operator settings ...161 6.3.1.3 Calibration...162

Chapter 7 Parts ... 165 7.1 Heater housing ...165 7.2 Electronics enclosure ...169 7.3 Probe panel housing ...174 7.3.1 Probe panel housing with Masimo SET 1 SpO2 jack ...174 7.3.2 Probe panel housing with Masimo SET 2 or Nellcor SpO2 jack ...177 7.3.3 Probe panel housing with ResusView™ Heart Rate (HR) option (Panda iRes bedded only) ...178 7.4 Base assembly (bedded only)...178 7.5 Bed assembly (bedded only) ...184 7.6 Storage options (bedded only) ...191 7.7 Freestanding model parts ...194 7.8 Wall mount model parts ...196 7.9 Harness list ...198 7.10 Giraffe scale service parts ...199 7.11 Panda scale service parts...200 7.12 Options ...201 7.12.1 Accessories ...201 7.12.2 SpO2 system accessories...202 7.12.2.1 Masimo SpO2 system accessories...202 7.12.2.2 Nellcor SpO2 system accessories...203 7.12.3 Resuscitation system accessories ...203 7.12.3.1 T-piece resuscitation system accessories ...204 7.12.4 ResusView™ Heart Rate Option accessories ...204 7.12.5 Shelf accessories ...204 7.12.6 Mattress accessories ...204 7.12.7 Bedside panel accessories...205 7.12.8 Dovetail rail accessories...206 7.12.9 IV pole accessories ...207 7.12.10 Silo accessories ...207 7.12.11 DIN rail accessories ...207 7.12.12 UPS accessories...208 7.12.13 Phototherapy accessories...208 7.12.14 Upgrades ...208 7.12.15 Giraffe scale ...210 7.12.16 Panda scale parts ...211 7.12.17 Power cords...212 7.13 Labels...212 7.13.1 Labels on the back of Giraffe Warmers or Panda iRes Warmers ...213 7.13.2 Heater grille accessory warning label set (bedded only) ...213 M1128921 Revision U

Panda Warmer Family and Giraffe Warmer

13/331

Contents

Service Manual

7.13.3 Labels on probe panel housing ...214 7.13.4 Labels on probe panel housing of Panda iRes Warmers with ResusView Heart Rate option ...215 7.13.5 Control panel labels...215 7.13.6 Labels on freestanding model ...216 7.13.7 Labels on wall mount model ...218

Chapter 8 Parts replacement ... 221 8.1 Parts replacement safety ...221 8.2 Heater head removal from wall bracket (wall mount only)...221 8.3 Heater housing repairs...222 8.3.1 Upper heater housing removal...222 8.3.2 Heat engine assembly removal ...223 8.3.3 Heater alignment ...228 8.3.4 Power supply replacement...231 8.3.5 Alarm light board or indicator light board replacement ...234 8.3.6 Replacing an observation light bulb ...237 8.3.7 Replacing the procedure light bulb...240 8.4 Electronic enclosure repairs ...241 8.4.1 Power board ...241 8.4.2 F7 and F8 fuse replacement...245 8.4.3 115 V transformer repair procedure ...246 8.4.4 Control board ...247 8.4.5 Lithium-Ion battery replacement...249 8.4.6 Touch panel or LCD assembly...250 8.4.6.1 LED display upgrade kit...255 8.4.7 Observation light dimmer control...260 8.4.8 Power standby switch replacement...261 8.4.9 Outlet panel repairs ...262 8.4.10 Maneuvering handle ...265 8.5 Probe panel housing repairs...266 8.5.1 Probe panel housing disassembly ...266 8.5.2 HR module removal (Panda iRes Warmers with ResusView Heart Rate (HR) option only)...267 8.5.3 SpO2 interface board replacement ...269 8.5.3.1 SpO2 interface board replacement for Masimo SET 1 ...269 8.5.3.2 SpO2 interface board replacement for Masimo SET 2 and Nellcor ...271 8.5.4 SpO2 connector/flex circuit replacement ...273 8.5.5 HR acquisition board or HR interface board replacement for ResusView Heart Rate option...274 8.5.6 Scale connector replacement (bedded only) ...276 8.5.7 Patient probe connector replacement...277 8.5.8 Probe panel upper housing replacement ...278 8.6 Appearance strip replacement ...280 8.7 Lower unit repairs (bedded and freestanding) ...281 8.7.1 Removing the bed (bedded only)...282 8.7.2 Elevating column replacement (bedded only) ...284 8.7.3 Foot switches (bedded only) ...286 14/331

Panda Warmer Family and Giraffe Warmer

M1128921 Revision U

Service Manual

Contents

8.7.4 Caster replacement (bedded and freestanding) ...287 8.7.5 Adjusting bed height using manual elevating column (bedded only)...288 8.7.5.1 Adjusting bed height on devices with the pin ...288 8.7.5.2 Adjusting bed height on devices with the crank handle ...289 8.7.6 Base and rail mounting block replacement (freestanding only) ...290 8.8 Scale control board replacement ...292 8.9 Scale load cell replacement...294 8.10 Dovetail rail suction tubing disassembly ...295

Chapter 9 Preventive maintenance ... 297 9.1 Maintenance schedule ...297 9.1.1 User maintenance ...297 9.1.2 Service maintenance ...298 9.2 Disassembling the bedside panels ...299 9.3 Reassembling the bedside panels ...301 9.4 Testing the supply pressure alarm ...302 9.5 Functional testers and patient simulators ...303

Chapter 10 Tools... 305 10.1 Hand tools ...305 10.2 Service tools ...305

Chapter 11 Specifications... 307 11.1 Power requirements and accessory outlets...307 11.2 Operating environment ...307 11.2.1 Storage conditions ...307 11.2.2 Electrical specifications ...307 11.3 Shipping conditions ...308 11.4 User control settings ...308 11.5 Defibrillation proof, signal input/output, and installation specifications ...308 11.6 System performance ...308 11.6.1 Weight scale performance (bedded only)...309 11.6.2 Irradiance ...310 11.7 Mechanical specifications...310 11.7.1 Accessories (bedded only) ...311 11.8 Nellcor SpO2 specifications ...311 11.9 Masimo SpO2 specifications...312 11.10 T-piece resuscitation specifications ...313 11.11 Bag and Mask resuscitation specifications ...314 11.12 ResusView Heart Rate Option specifications ...315 11.13 Alarm priorities...317 M1128921 Revision U

Panda Warmer Family and Giraffe Warmer

15/331

Contents

Service Manual

11.14 Alarm hierarchy ...317

Chapter 12 RS-232 Datalink ... 321 12.1 RS-232 Datalink ...321 12.2 Serial Data Interface ...322 12.3 Specifications ...322 12.3.1 Detailed description of data stream...322 12.3.2 Data stream ...324 12.4 Alarm codes ...325 12.5 Required characteristics of systems for support of Warmer RS-232 DataLink ...326 12.6 Nurse Call Interface ...327 12.7 Cable requirements for Datalink (Serial Comm and Nurse Call)...327 12.7.1 RS-232 pin definitions for Serial Data Interface...327 12.7.2 RS-232 pin definitions for Nurse Call ...328 12.8 Serial Data Interface cable connection requirements ...328 12.8.1 Cable requirements ...328

16/331

Panda Warmer Family and Giraffe Warmer

M1128921 Revision U

1 Chapter 1 Introduction 1.1 Scope This service manual describes how to maintain, repair, and service the Panda and Giraffe Warmers that are used in hospital delivery rooms, hospital newborn nurseries, and neonatal intensive care units (NICU).

1.2 Intended users The intended users for this manual are biomedical engineering service providers of the hospital and GE service personnel.

1.3 User responsibility The device operates as this manual and related labels or inserts describe, when the supplied instructions to assemble, operate, do the maintenance, and repair the device are obeyed. You must periodically check the device. Do not use a defective device. Immediately replace all parts that are broken, missing, worn, damaged, or have contamination. If such repair or replacement becomes necessary, call or write to the nearest GE HealthCare Regional Service Center for service recommendations. Only GE HealthCare qualified personnel must repair the device and its parts according to the written instructions supplied by GE HealthCare. The user of the device is responsible for all malfunctions that occur because of incorrect use, incorrect maintenance, incorrect repair, damage, or change by a person other than GE HealthCare.

1.4 Introduction Infant radiant warmers provide infrared heat in a controlled manner to neonates who are unable to thermoregulate based on their own physiology. Infant radiant warmers may be used to facilitate the neonate’s transition to the external environment or to provide a controlled open environment. Radiant heat from an infrared heat source is focused onto the bed to warm the patient. The operator may select either the heater power (Manual Mode) or skin temperature (Baby Mode) control method. Depending on the control method selected, the heater is either regulated at the operator selected power level or the heater output is modulated to maintain the patient’s temperature at the value selected by the operator. The Panda and Giraffe Warmers are each offered in a bedded model: the Panda iRes Warmer and the Giraffe Warmer. The Panda Warmer also offers 2 non-bedded models: Freestanding and Wall Mount. The model type is indicated on the label and on the device’s splash screen.

M1128921 Revision U

Panda Warmer Family and Giraffe Warmer

17/331

1.4 Introduction

Service Manual

Table 1-1 Warmer models Panda iRes Warmer (bedded)

Panda Freestanding Warmer (non-bedded)

Panda Wall Mount Warmer Giraffe Warmer (non-bedded)

Table 1-2 Warmer splash screen images Panda iRes Warmer splash screen

Panda Freestanding and Panda Wall Giraffe Warmer splash screen Mount Warmer non-bedded splash screen

The information in this manual refers to all models, unless otherwise specified. The term “bedded” refers to both the Giraffe Warmer and the Panda iRes Warmer.

18/331

Panda Warmer Family and Giraffe Warmer

M1128921 Revision U

Service Manual

1.4 Introduction

1.4.1 Freestanding and wall-mount warmer WARNING PATIENT INJURY HAZARD - HYPOTHERMIA OR HYPERTHERMIA Make sure that the bassinet is in the correct position when used with a freestanding or wall-mount warmer. A bassinet that is not in the correct position can make the patient too cold or too warm. • You must do the pre-use checkout procedure before you put the patient in the bassinet. Make sure the casters on the freestanding warmer operate correctly and are locked when used with the bassinet. • Use the instructions on the warmer to make sure the bassinet is at the correct height. A bassinet that is not at the correct position can make the patient too cold or too warm. • Mattress tilt can cause hot or cold areas in the bassinet. • Put the patient in the center of the mattress. Figure 1-1 Freestanding model The freestanding warmer is a movable device with which you can use a bed or bassinet.

WARNING PERSONNEL INJURY HAZARD Do not put more than 3 kg on each Freestanding warmer accessory rail.

M1128921 Revision U

Panda Warmer Family and Giraffe Warmer

19/331

1.4 Introduction

Service Manual

Figure 1-2 Wall-mount model The wall-mount warmer is a stationary device that you can move a bed or bassinet below.

WARNING PERSONNEL INJURY HAZARD Do not put more than 1.5 kg on each wall-mount warmer accessory rail.

1.4.2 Resuscitation system There are 2 different types of resuscitation systems that can be integrated into the device: T-piece and Bag and Mask. The integrated resuscitation system supplies the basic equipment that is required for pulmonary resuscitation of infants. Pulmonary resuscitation includes the necessary procedures to clear the airway and supply oxygen, air/oxygen mixtures, or manual ventilation to the infant. These are clinical procedures that represent the established standard of care.*1 Resuscitation may be necessary if an infant cannot breathe sufficiently to supply oxygen to tissue or to remove carbon dioxide from the body. Alternative tools for ventilation must be available. Do not use the integrated resuscitation system on unattended infants. The integrated resuscitation system includes: • Venturi suction device • 2 medical gas flowmeters • Airway pressure manometer • Peak Inspiratory Pressure (PIP) control knob (T-piece resuscitation system only) If your device has an air/oxygen blender with high-pressure yokes, at 1.5 times the rated supply pressure, the device will internally vent the source gas to maintain blender performance. NOTE Some older model devices can possibly not have an air/oxygen blender. There are no inlet pressure hoses directly connected to the inlets of the device. GE does not supply the inlet pressure hoses.

*1

Wyllie J, Perlman JM, Kattwinkel J et al. on behalf of the Neonatal Resuscitation Chapter Collaborators. Part 7: Neonatal resuscitation: 2015 International Consensus on Cardiopulmonary Resuscitation and Emergency Cardiovascular Care Science with Treatment Recommendations. Resuscitation 2015; 95: e171-e203.

20/331

Panda Warmer Family and Giraffe Warmer

M1128921 Revision U

Service Manual

1.5 Features

1.5 Features For information about the scale, refer to Giraffe™ and Panda™ Scale (Shekel*) Service Manual.

1.5.1 Heater head and radiant heater All Giraffe and Panda devices have the same heater head to contain the radiant heater. Because of the small size of the heater reflector and its compound elliptical shape, specially made for this device, the heater head is very compact compared with other warmers currently on the market. This compact size keeps the area that the heater head fills above the bed surface to a minimum. With the area above the bed clear, the caregiver can monitor and treat the patient unobstructed. This open area also lets the head of an X-ray machine be put above the patient without moving the heater head or patient.

1.5.2 Optional integrated SpO2 and resuscitation modules All Giraffe and Panda devices can have the optional integrated SpO2 module. The Giraffe Warmer, Panda iRes Warmer, and Panda Freestanding Warmer can also have the optional integrated resuscitation module. The SpO2 option lets the caregiver monitor the blood oxygen level of the patient. The optional resuscitation module lets the caregiver administer forced breathing if it is required. The resuscitation module can have the traditional Bag and Mask technology or T-piece technology.

1.5.3 Hands Free Alarm Silence A different feature, unique in warmers, is the Hands Free Alarm Silence. This is a standard feature on all Giraffe and Panda Warmers. The Hands Free Alarm Silence operates the same as the Alarm Silence key for all alarms. With the Hands Free Alarm Silence, it is not necessary to touch a panel surface to silence alarms. The proximity sensor for the Hands Free Alarm Silence is found in the alarm light panel (non-IEC compliant devices) or the indicator light panel (IEC compliant devices). You can silence the alarm with a movement of the hand approximately 2 to 6 inches in front of the sensor. The Giraffe and Panda devices also have a standard Alarm Silence key as an alternative method to silence alarms.

1.5.4 ResusView™ Heart Rate (HR) option The ResusView™ Heart Rate (HR) option, available only on Panda iRes Warmers (bedded), measures the heart rate of the patient. When the HR option is enabled, a heart symbol flashes on the screen, the ECG waveform shows on the screen, and an audio tone operates at a speed that is consistent with the heart rate measurement.

M1128921 Revision U

Panda Warmer Family and Giraffe Warmer

21/331

1.6 Mechanical controls, cable connections, and features

Service Manual

1.6 Mechanical controls, cable connections, and features Figure 1-3 Warmer, front oblique view 1 1

2 3 4 5 6 7

8

Item

Description

Models

1

2 dimmable observation lights

All

2

Adjustable procedure light (optional for Panda)

All

3

Procedure light switch

All

4

Display screen

All

5

Integrated resuscitation system (optional)

Bedded Freestanding

22/331

6

Bed, with integrated scale (optional)

Bedded

7

Front bedside panel

Bedded

8

Tilt lever

Bedded

Panda Warmer Family and Giraffe Warmer

M1128921 Revision U

Service Manual

1.6 Mechanical controls, cable connections, and features

Figure 1-4 Warmer, side view

1 13 12 11 2

10

3

9 8

4

7

6

5

Item

Description

Models

1

Recessed radiant heater

All

2

Side bedside panel

All

3

Front handle

Bedded

4

Pass-through drawer (single-drawer or double-drawer) (optional)

Bedded

5

2 height adjustment pedals and elevating base (optional)

Bedded

6

Casters

Bedded

• 3 casters for freestanding models

Freestanding

• 4 casters for bedded models 7

Brakes

Bedded

• 2 brakes for freestanding models

Freestanding

• 4 brakes for bedded models 8

Tank guard (on models with yoke-equipped resuscitation systems)

Bedded

9

Scale cable jack

Bedded

10

Skin temperature probe jack

All

11

High-pressure air/oxygen yoke (on models with yoke-equipped resuscitation systems)

Bedded

M1128921 Revision U

Panda Warmer Family and Giraffe Warmer

Freestanding

Freestanding

23/331

1.6 Mechanical controls, cable connections, and features

Service Manual

Item

Description

Models

12

Maneuvering handle and power cord wrap

Bedded Freestanding

13

24/331

Dovetail rail (shortened on wall-mount model, only inside on freestanding models)

Panda Warmer Family and Giraffe Warmer

Bedded Freestanding

M1128921 Revision U

Service Manual

1.6 Mechanical controls, cable connections, and features

Figure 1-5 Warmer, rear view

1 10 6 11 5 2 8

8

4

9 3 12 9

7

Item

Description

Models

1

RS-232 connector

All

2

2 accessory power outlets

All

3

SpO2 probe jack (optional)

All

4

Rear bedside panel

Bedded

5

Power cord inlet

All

6

Mains power switch

All

7

Suction canister holder (only on devices with resuscitation system)

Bedded

M1128921 Revision U

Panda Warmer Family and Giraffe Warmer

Freestanding

25/331

1.7 Display and display controls

Service Manual

Item

Description

Models

8

Gas connection inlets (only on devices with resuscitation system)

Bedded

Tank yokes (only on devices with resuscitation system)

Bedded

9

Freestanding Freestanding

10

Speaker

All

11

Grounding equalization post

All

12

ECG Care Cable jack (optional)

Bedded

1.7 Display and display controls You can get access to the control panel from the left or right side of the device.

26/331

Panda Warmer Family and Giraffe Warmer

M1128921 Revision U