Oxford Advance Parts Manual Rev AOxford Advance Parts Manual Rev A

Oxford /Hoyer Advance ®

NO.

PART NUMBER

1 2 3 4 5 6 7 8 9 10 11 11 12 13 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

0Y0066 0Y0109 0Y0033 0Y0034 0Y0035 0Y0036 0Y0037 0Y0038 0Y0039 0Y0040 0Y0110 0Y0106 0Y0067 0Y0111 0Y0107 0Y0071 0Y0068 0Y0072 0Y0031 0Y0069 0Y0032 0Y0041 0Y0042 0Y0043 0Y0044 0Y0108 0Y0045 0Y0046 0Y0047 0Y0070 0Y0053 0Y0379 0Y0149 0Y0729

2 0411.PM.0009 Rev A

®

DESCRIPTION

QTY

100mm rear castor (braked) 75mm front castor (non-braked) Mast extrusion including labels Boom extrusion (inc. boom end caps and labels except for Oxford/Hoyer dome label) Push handle assembly (including fixings) Casted boom to mast pivot joint (including connection bolts/fixings/spacers) Spreader bar assembly complete (6 point) Base assembly (inc. base casting, bottom plate, welded post & labels, not internal parts) Left leg extrusion (including fixings) Right leg extrusion (including fixings) Linak controller (UK/EU) Linak controller (US) Linak battery Linak hand control (UK/EU) Linak hand control (US) Linak charge lead (UK) Linak charge lead (US) Linak charge lead (EU) Linak actuator - 350mm stroke (inc. location pins, sleeves, washers, circlips and labels) Linak battery and controller brackets/fixings Hydraulic pump - 350mm stroke (US only) (inc. labels & serial number) Foot pedal mechanism complete Foot push pad assembly complete Decal set (Oxford) not shown - no serial number labels Decal set (Hoyer) not shown - no serial number labels Boom to mast pivot plastic caps Front castor leg inserts including fixings (plastic) Knob kit (inc. mast tightening knob, elastic leg restraint and leg disengage handle) Fixings kit (all bolts, screws and fixings) Handset clip (not shown) Linak charger and stand assembly (without charging lead) Spreader bar washer and o-ring spares kit Actuator fixing kit Boom end plastic cap

2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 2 2 1 1 2 1 1 1 1

SERIAL NO.