Vivid S60 and S70 Basic Service Manual sw ver v204 Rev 1 June 2020

P R E L I M I N A R Y

© 2020 General Electric Company. Manufacturer: GE Medical Systems, Israel Ltd. Nativ Ha'or Street no. 1 3508510 Haifa ISRAEL Tel: (+972) 4851 9555 Fax: (+972) 4851 9500

19.JUN.2020 VS60-VS70_FRNT_CVR.FM

DIRECTION BC091840-1EN, REVISION 1

VIVID S60/VIVID S70 BASIC SERVICE MANUAL

Important Precautions TRANSLATION POLICY

-

-i

DIRECTION BC091840-1EN, REVISION 1

-ii

VIVID S60/VIVID S70 BASIC SERVICE MANUAL

-

DIRECTION BC091840-1EN, REVISION 1

VIVID S60/VIVID S70 BASIC SERVICE MANUAL

-

-iii

DIRECTION BC091840-1EN, REVISION 1

VIVID S60/VIVID S70 BASIC SERVICE MANUAL

-

-v

DIRECTION BC091840-1EN, REVISION 1

-viii

VIVID S60/VIVID S70 BASIC SERVICE MANUAL

-

DIRECTION BC091840-1EN, REVISION 1

-x

VIVID S60/VIVID S70 BASIC SERVICE MANUAL

-

DIRECTION BC091840-1EN, REVISION 1

VIVID S60/VIVID S70 BASIC SERVICE MANUAL

DAMAGE IN TRANSPORTATION All packages should be closely examined at time of delivery. If damage is apparent write “Damage In Shipment” on ALL copies of the freight or express bill BEFORE delivery is accepted or “signed for” by a GE representative or hospital receiving agent. Whether noted or concealed, damage MUST be reported to the carrier immediately upon discovery, or in any event, within 14 days after receipt, and the -xii

-

DIRECTION BC091840-1EN, REVISION 1

VIVID S60/VIVID S70 BASIC SERVICE MANUAL

contents and containers held for inspection by the carrier. A transportation company will not pay a claim for damage if an inspection is not requested within this 14-day period.

CERTIFIED ELECTRICAL CONTRACTOR STATEMENT - FOR USA ONLY All electrical Installations that are preliminary to positioning of the equipment at the site prepared for the equipment shall be performed by licensed electrical contractors. Other connections between pieces of electrical equipment, calibrations and testing shall be performed by qualified GE personnel. In performing all electrical work on these products, GE will use its own specially trained field engineers. All of GE’s electrical work on these products will comply with the requirements of the applicable electrical codes. The purchaser of GE equipment shall only utilize qualified personnel (i.e., GE’s field engineers, personnel of third-party service companies with equivalent training, or licensed electricians) to perform electrical servicing on the equipment.

OMISSIONS & ERRORS If there are any omissions, errors or suggestions for improving this documentation, please contact the GE Global Documentation Group with specific information listing the system type, manual title, part number or direction number, revision number, page number and suggestion details. Mail the information to: Service Documentation, GE Vingmed Ultrasound AS P.O.Box: 141 3191 HORTEN NORWAY GE employees should use Post-Market Quality Management (PQM) to report service documentation issues.

SERVICE SAFETY CONSIDERATIONS

DANGER

DANGER

WARNING WARNING

DANGEROUS VOLTAGES, CAPABLE OF CAUSING DEATH, ARE PRESENT IN THIS EQUIPMENT. USE EXTREME CAUTION WHEN HANDLING, TESTING AND ADJUSTING. Do not attempt to disassemble or alter any part of the Ultrasound system including the probe, the battery, the AC/DC adapter and accessories. Disassembly or modification may result in electrical shock. Use all Personal Protection Equipment (PPE) such as gloves, safety shoes, safety glasses, and kneeling pad, to reduce the risk of injury. For a complete review of all safety requirements, see the Chapter 1 Safety Considerations section in the Service Manual.

-

-xiii

DIRECTION BC091840-1EN, REVISION 1

VIVID S60/VIVID S70 BASIC SERVICE MANUAL

LEGAL NOTES The contents of this publication may not be copied or duplicated in any form, in whole or in part, without prior written permission of GE. GE makes no representations or warranties with respect to the information herein. In addition, the information is subject to change without notice. Every precaution has been taken in the preparation of this document. Nevertheless, GE assumes no responsibility for errors, omissions, or any damages, including special or consequential, resulting from the use of this information. GE will issue updates to this information periodically, as needed. If there are any questions regarding the information contained in this manual, please contact your GE Representative.'

TRADEMARKS All products and their name brands are trademarks of their respective holders.

COPYRIGHTS © 2020 by General Electric Company Inc. All Rights Reserved.

-xiv

-

DIRECTION BC091840-1EN, REVISION 1

VIVID S60/VIVID S70 BASIC SERVICE MANUAL

Revision History Revision

Date

Reason for change

1

2020-06-19

Initial release of manual.

List of Effected Pages (LOEP) Pages

Revision

Pages

Revision

Pages

Revision

Title Page

1

3-1 to 3-74

1

8-1 to 8-230

1

Important Precautions -i to -xvi

1

4-1 to 4-46

1

9-1 to 9-32

1

TOC

1

5-1 to 5-38

1

10-1 to 10-34

1

1-1 to 1-32

1

6-1 to 6-4

1

Back Cover

N/A

2-1 to 2-16

1

7-1 to 7-26

1

This page was intentionally left blank.

-

-xv

DIRECTION BC091840-1EN, REVISION 1

VIVID S60/VIVID S70 BASIC SERVICE MANUAL

This page was intentionally left blank.

-xvi

-

P R E L I M I N A R Y DIRECTION BC091840-1EN, REVISION 1

VIVID S60/VIVID S70 BASIC SERVICE MANUAL

CHAPTER 1 Introduction Overview...1 - 1 Purpose of Chapter 1... 1 - 1 Contents in this Chapter... 1 - 1 Service Manual Overview... 1 - 2 Contents in this Service Manual... 1 - 2 Typical Users of the Basic Service Manual... 1 - 3 Vivid™ S60/S70 Models Covered in this Manual... 1 - 4 Product Description... 1 - 5 Overview of the Vivid S60/Vivid S70 Ultrasound Scanner... 1 - 5 Purpose of Operator Manual(s)... 1 - 5 Important Conventions... 1 - 6 Conventions Used in this Manual... 1 - 6 Model Designations... 1 - 6 Icons... 1 - 6 Safety Precaution Messages... 1 - 6 Standard Hazard Icons... 1 - 7 Safety Considerations... 1 - 8 Introduction... 1 - 8 Human Safety... 1 - 8 Mechanical Safety... 1 - 10 Electrical Safety... 1 - 12 Probes... 1 - 12 Peripherals... 1 - 13 Safety and Environmental Guidelines... 1 - 13 Patient Environment IEC/EN 60601-1... 1 - 13 Vivid S60/Vivid S70 Battery Safety (part of Power Supply)... 1 - 14 Patient Data Safety... 1 - 14 Dangerous Procedure Warnings... 1 - 15 Lockout/Tagout (LOTO) Requirements... 1 - 16 Product Labels and Icons... 1 - 17 Universal Product Labels... 1 - 17 System Rating Label... 1 - 17 General Label... 1 - 20 Label Descriptions... 1 - 21 Vivid S60/Vivid S70 External Labels... 1 - 25 Table of Contents

1-i

DIRECTION BC091840-1EN, REVISION 1

VIVID S60/VIVID S70 BASIC SERVICE MANUAL

GND Label... 1 - 25 Returning/Shipping Probes and Repair Parts... 1 - 26

1-ii

EMC, EMI, and ESD... Electromagnetic Compatibility (EMC)... CE Compliance... Electrostatic Discharge (ESD) Prevention... General Caution...

1 - 27 1 - 27 1 - 27 1 - 28 1 - 28

Customer Assistance... Contact Information... Phone Numbers for Customer Assistance... Phone and Fax Numbers for Manufacturer...

1 - 29 1 - 29 1 - 30 1 - 31

Table of Contents

P R E L I M I N A R Y DIRECTION BC091840-1EN, REVISION 1

VIVID S60/VIVID S70 BASIC SERVICE MANUAL

CHAPTER 2 Site Preparations Overview...2 - 1 Purpose of Chapter 2... 2 - 1 Console Requirements...2 - 2 Unit Environmental Requirements... 2 - 2 Environmental Requirements... 2 - 2 Cooling Requirements... 2 - 2 Lighting Requirements... 2 - 2 Time and Manpower Requirements... 2 - 2 Electrical Requirements... 2 - 3 Vivid S60/Vivid S70 Power Requirements... 2 - 3 Inrush Current... 2 - 3 Site Power Outlets... 2 - 3 Mains Power Plug... 2 - 3 Power Stability Requirements... 2 - 4 EMI Limitations... 2 - 4 EMI Prevention/Abatement... 2 - 5 Probe Environmental Requirements... 2 - 5 Facility Needs...2 - 6 Purchaser Responsibilities... 2 - 6 Mandatory Site Requirements... 2 - 7 Site Recommendations... 2 - 7 Recommended Ultrasound Room Layout... 2 - 8 Minimal Floor Plan Suggestion... 2 - 9 Recommended Floor Plan Suggestion... 2 - 10 Suggested Floor Plan with System and Workstation in Same Room . . 2 - 11 Networking Pre-Installation Requirements... 2 - 12 Stand-alone Unit (without Network Connection)... 2 - 12 Scanner Connected to Hospital’s Network... 2 - 12 InSite™ requirements... 2 - 12 Purpose of the DICOM Network Function... 2 - 12 DICOM Option Pre-Installation Requirements... 2 - 12 Connectivity Installation Worksheet...2 - 13

Table of Contents

1-iii

DIRECTION BC091840-1EN, REVISION 1

VIVID S60/VIVID S70 BASIC SERVICE MANUAL

CHAPTER 3 System Setup Overview... 3 - 1 Purpose of Chapter 3... 3 - 1 Setup Reminders... 3 - 2 Average Setup Time... 3 - 2 Setup Warnings... 3 - 3 System Acclimation Time... 3 - 3 Safety Reminders... 3 - 4 Receiving and Unpacking the Equipment... 3 - 5 Warnings for Receiving and Unpacking the Equipment... 3 - 5 Overview... 3 - 5 Additional labels on the Shipping Carton... 3 - 8 Unpacking the Vivid S60/Vivid S70... 3 - 9 Unpacking the Vivid S60/Vivid S70 Scanner with Peripherals... 3 - 9 Unpacking the Vivid S60/Vivid S70 Scanner... 3 - 9 Unpacking the Ocean Shipping package... 3 - 13 Part List... 3 - 13 Unpacking instruction (Ocean package)... 3 - 14 Physical Inspection... 3 - 19 System Voltage Settings... 3 - 19 EMI Protection... 3 - 19 Preparing for Setup... Verifying Customer Order... Physical Inspection... Component Inspection... Damage Inspection Checklist... Front View of the Vivid S60/Vivid S70 ultrasound system... Rear View of the Vivid S60/Vivid S70 ultrasound system... Peripheral/Accessory Connector Panel... EMI Protection...

3 - 20 3 - 20 3 - 20 3 - 20 3 - 20 3 - 22 3 - 23 3 - 24 3 - 24

Completing the Setup... 3 - 25 Purpose of this Section... 3 - 25 System Specifications... 3 - 25 System Requirements Verification... 3 - 25 Physical Dimensions... 3 - 25 Mass with Monitor, without Probes and Peripherals... 3 - 25 Acoustic Noise Level... 3 - 25 Electrical Specifications... 3 - 26 1-iv

Table of Contents

P R E L I M I N A R Y DIRECTION BC091840-1EN, REVISION 1

VIVID S60/VIVID S70 BASIC SERVICE MANUAL

Verification of the ultrasound system Voltage Setting... 3 - 26 Electrical Specifications for the ultrasound system... 3 - 26 Connections on the I/O Rear Panel... 3 - 26 Connect Ethernet... 3 - 26 Connect USB Flash Card... 3 - 26 Connections on the Patient I/O Panel... 3 - 27 Connect ECG... 3 - 27 Connecting Probes... 3 - 28 Introduction to Connecting Probes... 3 - 28 Connect a Probe... 3 - 29 Disconnect Probes... 3 - 30 Power on/Boot up... 3 - 30 Power Shut Down... 3 - 30 Complete Power Down... 3 - 30 Configuration...3 - 31 Purpose of this Section... 3 - 31 Ultrasound System Configuration... 3 - 31 Select System Settings Screen... 3 - 31 Enter Location... 3 - 32 Adjust Date and Time... 3 - 33 Install the Online User Manuals... 3 - 34 Select Language for User Interface and Online Manuals... 3 - 35 Select Units of Measure and Video Format... 3 - 36 Service Screen Setup... 3 - 37 Open Service Screen... 3 - 37 Select Video Format, PAL or NTSC... 3 - 37 Alphanumeric Keyboard Configuration... 3 - 38 Add Printer... 3 - 39 Optional Peripherals/Peripheral Connection... 3 - 40 Approved Internal Peripherals... 3 - 40 Approved External Peripherals... 3 - 40 External Peripherals for Connection to USB... 3 - 40 External Peripherals for Connection to Ethernet (TCP/IP)... 3 - 40 Connecting the HP Laserjet M451 Color Printer... 3 - 40 Software Options Configuration... 3 - 42 Software Option Introduction... 3 - 42 To Install a Software Option... 3 - 42 Remote Check and Configurations... 3 - 42 Connectivity Overview... 3 - 43 Physical Connection... 3 - 43 Stand-alone ultrasound system... 3 - 43 “Sneaker Net” Environment... 3 - 43 Wired Ethernet from ultrasound system to a Workstation... 3 - 43 Table of Contents

1-v

DIRECTION BC091840-1EN, REVISION 1

VIVID S60/VIVID S70 BASIC SERVICE MANUAL

Connection from ultrasound system to a DICOM Server on a Network... 3 - 43

1-vi

Connectivity Setup... Introduction... Compatibility... Select TCP/IP Screen... Changing the AE Title and/or Port Number (Port No.)... Set the Remote Archive’s Network Information... To Access the Tcpip Screen... To Add a Server in the Server Config List... To Modify the Setup for a Server in the List... To Delete a Server from the List... Save the New Settings... Wireless Network Configuration...

3 - 44 3 - 44 3 - 44 3 - 45 3 - 46 3 - 46 3 - 46 3 - 46 3 - 47 3 - 47 3 - 47 3 - 48

Options Setup... Overview... Software Options... Color Video Printer Setup... USB Flash Card Setup... Tricefy™... Wireless Network Configuration... Content in the Netgear Wireless Interface USB Adapter A6210 kit . . . Connecting the wireless USB adapter A6210 kit to Vivid S60/Vivid S70 Connect the adapter using the USB-docking... Connect the adapter directly to the USB-port... Install the wireless network label on Vivid S60/Vivid S70... Wireless Network Configuration - Vivid S60/Vivid S70... Configuring the Wireless Network Adapter... Wireless settings - Other Options... Reconfigure already configured network... Properties... Monitor... Diagnostics... Installation and set up of the View-X function... CARTO® Interface Setup... Content in the kit... Vivid S60/Vivid S70 interfacing with CARTO 3... Vivid S60/Vivid S70 interfacing with CARTO 3 and External Monitor . . Prerequisites - Software Options... Installation... Important when Power On... Carto 3 feature - Software connectivity... Vivid S60/Vivid S70 Carto 3 feature - Software workflow... Verifying/Installing SW option keys...

3 - 49 3 - 49 3 - 49 3 - 49 3 - 49 3 - 50 3 - 51 3 - 51 3 - 52 3 - 52 3 - 53 3 - 54 3 - 55 3 - 56 3 - 62 3 - 62 3 - 64 3 - 64 3 - 65 3 - 66 3 - 66 3 - 66 3 - 66 3 - 67 3 - 67 3 - 68 3 - 68 3 - 69 3 - 69 3 - 71

Table of Contents

P R E L I M I N A R Y DIRECTION BC091840-1EN, REVISION 1

VIVID S60/VIVID S70 BASIC SERVICE MANUAL

Setup... 3 - 71 Scanning... 3 - 71 External Monitor Output Resolution Adjustment... 3 - 72 Paperwork After Setup... 3 - 73 Installation Acceptance Test Criteria... 3 - 73 User’s Manual(s)... 3 - 73 Product Locator Installation Card... 3 - 73

Table of Contents

1-vii