ARTG Certificate SDC3 Nov 2012

Australian Register of Therapeutic Goods Certificate Issued to

Stryker Australia Pty Ltd for approval to supply

Stryker Australia Pty Ltd - Picture archiving and communication system, endoscopy ARTG Identifier

203190

ARTG Start date

22/11/2012

Product Category

Medical Device Included Class 1

GMDN

36240

GMDN Term

Picture archiving and communication system, endoscopy

Intended Purpose

Intended to electronically capture, transfer, store and display medical device data independently of the functions or parameters of any connected medical device. It is also intended to convert medical device data from one format to another in accordance with preset specifications.

Manufacturer Details

Address

Stryker Endoscopy

5900 Optical Court San Jose, California, 95138 United States Of America

Certificate number(s)

ARTG Standard Conditions The above Medical Device Included Class 1 has been entered on the Register subject to the following conditions: · The automatic conditions applicable to the inclusion of all kinds of medical devices in the Register are as specified in section 41FN of the Therapeutic Goods Act 1989., · The standard conditions that are imposed under section 41FO of the Therapeutic Goods Act 1989 when kinds of medical devices are included in the Register are as set out in the following paragraphs., · For a medical device included in the Register under Chapter 4 and imported into Australia, the Sponsor must ensure that information about the Sponsor is provided in such a way as to allow the sponsor to be identified., · Each sponsor shall retain records of the distribution of all of the sponsor's medical devices included in the Register under Chapter 4. In the case of records relating to a Class AIMD medical device, Class III medical device, or Class IIb medical device that is an implantable medical device, the distribution records shall be retained for a minimum period of 10 years. In the case of records relating to any other device, the distribution records shall be retained for a minimum period of 5 years., · The sponsor of a medical device included in the Register under Chapter 4 shall keep an up to date log of information of the kind specified in Regulation 5.8., · It is a condition of inclusion in the ARTG that the sponsor of a medical device that is an AIMD, Class III or implantable Class IIb provides three consecutive annual reports to the Head of the Office of Product Review, Therapeutic Goods Administration following inclusion of the device in the ARTG (as specified in 5.8 of the regulations). Annual reports are due on 1 October each year. Reports should be for the period 1 July to 30 June. The first report following the date of inclusion in the ARTG must be for a period of at least six months but no longer than 18 months. Subsequent reports are to be provided on 1 October for a further 2 years. The annual report must include all complaints and adverse events received by the manufacturer relating to problems with the use of the device that have been received by them over the year. For orthopaedic implant prosthesis that have been re-classified from Class IIb to Class III medical devices, annual report information must be submitted if the device meets either of the following criteria: I.The device was subject to a TGA application audit based on revision rate when the device transitioned from Class IIb to Class III; and/or II.No devices were supplied to the Australian marketplace before 30 June 2012. As per the standard automatic condition, annual reports should be submitted each year for the first three years of inclusion as a Class III medical device on the ARTG., · Where a medical device included in the Register, contains a substance which is included in the Fourth