DVP-SR320 Reference Guide

this occur, the player may not operate properly. In this case, remove the disc and leave the player turned on for about half an hour until the moisture evaporates.

WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. The mains lead must be changed only at a qualified service shop. Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine, fire or the like.

Note about the discs Do not use the following discs: – A disc recorded in a colour system other than NTSC, such as PAL or SECAM (this player conforms to the NTSC colour system). – A disc that has a non-standard shape (e.g., card, heart). – A disc with a label or sticker on it.

Region code Your player has a region code printed on the back of the unit and only will play commercial DVDs (playback only) labelled with identical region codes. This system is used to protect copyrights.

This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior.

CAUTION The use of optical instruments with this product will increase eye hazard. As the laser beam used in this CD/DVD player is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.

Precautions • To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. • The player is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the player itself has been turned off. • Do not install this player in a confined space, such as a bookshelf or similar unit. • Install the player so that the AC power cord (mains lead) can be unplugged from the wall socket immediately in the event of trouble. • If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the player. Should

2GB

Commercial DVDs labelled ALL will also play on this player. Depending on the commercial DVD, there may be no region code indication, even though playing the commercial DVD is prohibited by area restrictions. DVP–XXXX X

00V 00Hz NO.

Region code

00W

0-000-000-00

Copyrights, trademarks and software licence information • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. • “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation. • MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. • Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the

appropriate license(s) from Microsoft. • All other trademarks are trademarks of their respective owners. • THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER FOR DECODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4 VIDEO”) THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM

About this manual “DVD” may be used as a general term for commercial DVDs, DVD+RWs/DVD+Rs/DVD+R DLs (+VR mode) and DVD-RWs/ DVD-Rs/DVD-R DLs (VR mode, video mode).

TIME/TEXT

Playback Control Menu display

Checks the elapsed time and the remaining playback time. Input the time code for picture and music search (DVD and Xvid video files only).

Use the Control Menu to select a function and to view related information.

Selects either “USB” or “DISC” to be played.

Press DISPLAY.

DISC/USB

TOP MENU/MENU

To change the Control Menu display, press DISPLAY again.

(DVD VIDEO only) TOP MENU: Displays the top menu. MENU: Displays the menu. ORIGINAL/PLAY LIST

12(27) 18(34) T 1:32:55

PLAY DVD VIDEO

PROGRAM*1, *2

OFF OFF SET ON

PROGRAM ENTER

Quit: DISPLAY

A Control Menu items B Currently playing title/Total number of titles C Currently playing chapter/Total number of chapters D Playing time E Selected media type F Playback status G Selected item icon/menu options H Operation message I Selected Control Menu item

Menu list Item

Selects the type of title (DVD-VR mode) to be played: ORIGINAL, or edited PLAY LIST.

Selects the title, chapter, or track to play in the order you want. 1 Select “SET t,” then press ENTER and select the title (T), chapter (C), or track (T) you want to programme, and press ENTER. 2 Repeat selecting the title, chapter, or track. 3 Press N.

GB GB

SHUFFLE*1, *2 Plays the title, chapter, or track in random order. REPEAT*1, *2 Plays all titles/tracks/albums or a single title/ chapter/track/album/file repeatedly. A-B REPEAT*1, *2 Specifies the parts you want to play repeatedly. 1 During playback, select “SET t,” then press ENTER. The “A-B REPEAT” setting bar appears. 2 When you find the starting point (point A), press ENTER. 3 When you reach the ending point (point B), press ENTER again.

Item Name, Function TITLE/SCENE/TRACK CHAPTER/INDEX TRACK

Selects the title, scene, track, chapter, or index to be played.

,continued

3GB

PARENTAL CONTROL Set to prohibit playback on this player. PLAYER t: Playback of some DVD VIDEOs can be limited according to a predetermined level such as the age of the users. Scenes may be blocked or replaced with different scenes (Parental Control). PASSWORD t: Enter a 4-digit password using the number buttons. Also use this menu to change the password.

CUSTOM PICTURE MODE Selects the picture quality that best suits the programme you are watching. STANDARD: Displays a standard picture. DYNAMIC: Produces a bold dynamic picture by increasing the picture contrast and the colour intensity. CINEMA: Enhances details in dark areas by increasing the black level. MEMORY t: Adjusts the picture in greater detail.

Parental Control (limited playback) You can set a playback limitation level. 1 Select “PLAYER t,” then press ENTER. Enter or re-enter your 4-digit password, then press ENTER. 2 Press X/x to select “STANDARD,” then press ENTER. Press X/x to select an area, then press ENTER. When you select “OTHERS t,” select and enter a standard code. See “PARENTAL CONTROL AREA CODE LIST” at the end of this manual. 3 Press X/x to select “LEVEL,” then press ENTER. Press X/x to select the level, then press ENTER. Parental Control setting is complete. The lower the value, the stricter the limitation. To turn off the Parental Control function, set “LEVEL” to “OFF.” If you forget your password, enter “199703” in the password box, press ENTER, and then enter a new 4-digit password. SETUP QUICK: Use Quick Setup to choose the desired language of the on-screen display, the aspect ratio of the TV and the audio output signal. CUSTOM: In addition to the Quick Setup setting, you can adjust various other settings (page 6). RESET: Returns the settings in “SETUP” to the default setting. ZOOM*1 Magnifies the image up to four times the original size, scroll using C/X/x/c. ANGLE Changes the angle.

4GB

SHARPNESS Exaggerates the outline of the image to produce a sharper picture. OFF: Cancels this option. 1: Enhances the outline. 2: Enhances the outline more than 1. *1 To return to normal play, select “OFF” or press CLEAR. *2 The play mode is cancelled when: – you open the disc tray. – you turn off the player.

◆Items for DATA files Item

Item Name, Function ALBUM

Selects the album that contains music and photo files to be played. FILE Selects the photo file to be played. ALBUM Selects the album that contains the video file to be played. FILE Selects the video file to be played. DATE Displays the date the picture was taken by a digital camera. INTERVAL* Specifies the duration for which the slides are displayed on the screen.

EFFECT* Selects the effects to be used for changing slides during a slide show. MODE 1: The images randomly cycle through the effects. MODE 2: The image sweeps in from top left to bottom right. MODE 3: The image sweeps in from top to bottom. MODE 4: The image sweeps in from left to right. MODE 5: The image stretches out from the centre of the screen. OFF: Turns off this function. MEDIA Selects the media type you want to play. VIDEO: Plays video files. PHOTO (MUSIC): Plays photo and music files as a slide show. You can view a slide show with sound when music and photo files are placed in the same album. If the playing time of either music or photos is longer, the longer one continues without sound or image. PHOTO: Plays photo files. MUSIC: Plays music files. Press SUBTITLE while playing music files that contain unsynchronized lyric information. The player supports MP3 ID3 Lyrics only. * Depending on the file, this function may not be possible.

To play VIDEO CDs with PBC functions When you start playing a VIDEO CD with PBC (Playback control) functions, the menu for your selection appears.

To play without using PBC Press ./> or the number buttons while the player is stopped to select a track, then press N or ENTER. To return to PBC playback, press x twice, then press N.

Controlling TVs with the remote You can control the sound level, input source, and power switch of your Sony TV with the supplied remote. If your TV is listed in the table below, set the appropriate manufacturer’s code. When you replace the batteries of the remote, set the appropriate code number again. 1 While holding down TV [/1, press the number buttons to select your TV’s manufacturer’s code. 2 Release TV [/1.

Code numbers of controllable TVs Sony 01 (default) Hitachi 02 LG/Goldstar/NEC 04 MGA/Mitsubishi 13 Panasonic 19 Philips 21 Pioneer 16 RCA 10 Samsung 20 Sharp 18 Toshiba 07

Connecting a USB device You can connect a USB device to the USB jack of the player to play video, photo, or music files.

To remove the USB device Stop playback and disconnect the USB device from the USB jack.

To change LUN For some devices, LUN (Logical Unit Number) may appear. To change the LUN or original storage, press when the list of albums or tracks is displayed.

About supported USB devices • This player supports USB Mass Storage Class only. • This player supports FAT format USB device only. • Some USB devices may not work with this player.

5GB

CUSTOM Menu

BLACK LEVEL: Selects the black level (setup level) for video signals output. CUSTOM SETUP

You can adjust various settings. Press DISPLAY when the player is in stop mode, select (SETUP), and then select “CUSTOM.” The CUSTOM menu appears.

Menu list Item

Item Name, Function LANGUAGE SETUP

OSD (On-Screen Display): Switches the display language on the screen. MENU*1: Selects the desired language for the disc’s menu. (DVD VIDEO only) AUDIO*1: Switches the language of the sound track. When you select “ORIGINAL,” the language given priority in the disc is selected. (DVD VIDEO only) SUBTITLE*1: Switches the language of the subtitle recorded on the DVD VIDEO. When you select “AUDIO FOLLOW,” the language for the subtitles changes according to the language you selected for the sound track. (DVD VIDEO only) SCREEN SETUP TV TYPE: Selects the aspect ratio of the connected TV. 16:9

4:3 LETTER BOX

4:3 PAN SCAN

SCREEN SAVER: When set to “ON,” the screen saver appears when the player is in pause or stop mode for 15 minutes. Press N to turn off the screen saver. BACKGROUND: Selects the background colour or picture on the TV screen. If you set “JACKET PICTURE,” even though the disc does not contain a jacket picture, the “GRAPHICS” picture appears.

6GB

AUTO STANDBY: Sets the Auto Standby setting on or off. If you select “ON,” the player enters standby mode when left in stop mode for more than 30 minutes. AUTO PLAY: When set to “ON,” the player automatically starts playback when the player is turned on by a timer (not supplied). PAUSE MODE: Selects the picture in pause mode. Normally select “AUTO.” When the picture is output in high resolution, set to “FRAME.” (DVD only) TRACK SELECTION: Gives the sound track which contains the highest number of channels priority when you play a DVD VIDEO on which multiple audio formats (PCM, DTS, or Dolby Digital format) are recorded. If you select “AUTO,” priority is given. (DVD VIDEO only) MULTI-DISC RESUME: Switches the Multidisc Resume setting on or off. Resume playback can be stored in memory for up to 6 different DVD VIDEOs/VIDEO CDs. If you start the settings again, the resume point is cleared. (DVD VIDEO/VIDEO CD only) AUDIO SETUP AUDIO DRC (Dynamic Range Control)*2: Set according the surrounding environment. Set to “TV MODE” when the smallest sounds are indiscernible, or set to “WIDE RANGE” when the listening environment is good, for example, in a home movie theatre. DOWNMIX*2: Switches the method for mixing down to 2 channels when you play a DVD which has rear sound elements (channels), or is recorded in Dolby Digital format. Normally select “DOLBY SURROUND.” DIGITAL OUT: Selects if audio signals are output via the DIGITAL OUT (COAXIAL) jack. When you select “ON,” set also the following “DOLBY DIGITAL,” “DTS,” or “48kHz/96kHz PCM.” DOLBY DIGITAL: Selects the type of Dolby Digital signal. Set to “D-PCM” when the player is connected to an audio component without a built-in Dolby Digital decoder. DTS: Selects the type of DTS audio signal. Set to “ON” when you play a DVD VIDEO with DTS sound tracks. Do not set to “ON” when you connect the player to an audio component without a DTS decoder.

48kHz/96kHz PCM: Selects the sampling frequency of the digital audio output signal. (DVD VIDEO only) *1 When you select “OTHERS t,” select and enter a language code. See “LANGUAGE CODE LIST” at the end of this manual. *2 This function affects the output from the following jacks: – LINE OUT L/R (AUDIO) jacks. – DIGITAL OUT (COAXIAL) jack only when “DOLBY DIGITAL” is set to “D-PCM.”

Information Troubleshooting If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer.

The power is not turned on. c Check that the power cord (mains lead) is connected securely.

There is no picture/picture noise appears. c Re-connect the connecting cord securely. c The connecting cords are damaged. c Check the connection to your TV and switch the input selector on your TV so that the signal from the player appears on the TV screen. c The disc is dirty or flawed.

There is no sound. c Re-connect the connecting cord securely. c The connecting cord is damaged. c The player is in pause mode or in Slow-motion Play mode. c The player is in fast forward or fast reverse mode.

The remote does not function. c The batteries in the remote are weak. c The remote is not pointed at the remote sensor on the player. c When you operate the player by pressing buttons on the remote in sequence, press the buttons within 5 seconds of each other.

The disc does not play. c The disc is turned over. Insert the disc with the playback side facing down. c The disc is skewed. c The player cannot play certain discs. c The region code on the DVD does not match the player. c Moisture has condensed inside the player. c The player cannot play a recorded disc that is not correctly finalized.

The player does not operate properly. c When static electricity, etc., causes the player to operate abnormally, unplug the player. ,continued

7GB

“C:13:**” appears on the screen. c Clean the disc with a cleaning cloth or check its format.

The player does not detect a USB device connected to the player. c The USB device is not securely connected to the player. c The USB device or a cord is damaged. c Disc mode has not been switched to USB mode.

Playable file format Video: MPEG-1 (Cyber-shot data)/MPEG-4 (simple profile)*1/Xvid Photo: JPEG (DCF format) Music: MP3 (except for mp3PRO)/WMA (except for WMA Pro)*1, *2/ AAC*1, *2/LPCM/WAVE *1 Files with copyright protection (Digital Right Management) cannot be played. *2 The player does not play coded files such as Lossless.

Supported extensions: “.avi”, “.mpg”, “.mpeg”, “.mp4”, “.jpg”, “.mp3”, “.wma”, “.m4a”, “.wav” Supported discs: DVD, DVD±RW/±R/±R DL, Music CD/Super VCD, CD-R/-RW • DATA CDs recorded according to ISO 9660 Level 1/Level 2, or its extended format, Joliet. • DATA DVDs recorded according to UDF. • The player will play any file in the above, even if the file format differs. Playing such data may generate noise that can result in speaker damage. • To play a complex hierarchy of folders may take some time. Create albums with no more than two hierarchies. • Some video, photo, and music files may not play, depending on the encoding/recording condition. • To start playback and proceed to the next or another album/file may take some time. • The player will recognize a maximum of 200 albums and 600 files. It can recognize up to 300 music files and 300 photo files when “PHOTO (MUSIC)” is selected. • The player may not play a combination of two or more video files.

8GB

• The player cannot play a video file of size more than 720 (width) × 576 (height)/2 GB. • Depending on the file, playback may not be smooth. You are recommended to create the file at a lower bit rate. • The player may not play back the high bit rate video file on the DATA CD smoothly. You are recommended to play back using DATA DVD. • When playing visual data that is not supported by MPEG-4 format, only sound will be heard.

Note about recordable media Some recordable media cannot be played on this player due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. The disc will not play if it has not been correctly finalized. Also some DATA discs created in Packet Write format cannot be played.

For player that cannot play images that contain a copy protection only Images in DVD-VR mode with CPRM (Content Protection for Recordable Media) protection may not be played.

Note on playback operations of DVDs and VIDEO CDs Some playback operations of DVDs and VIDEO CDs may be intentionally set by software producers. Since this player plays DVDs and VIDEO CDs according to the disc contents the software producers designed, some playback features may not be available. Also, refer to the operating instructions supplied with the DVDs or VIDEO CDs.

Note on discs This unit is designed to playback discs that conform to the Compact Disc (CD) standard. DualDiscs and some music discs encoded with copyright protection technologies do not conform to the Compact Disc (CD) standard. Therefore, these discs may not be compatible with this unit.

Specifications System Laser: Semiconductor laser

Inputs/Outputs • LINE OUT L/R (AUDIO): Phono jack • DIGITAL OUT (COAXIAL): Phono jack • LINE OUT (VIDEO): Phono jack • USB: USB jack Type A, maximum current 500 mA (For connecting USB device)

General • Power requirements: 110 – 120 V AC, 50/60 Hz • Power consumption: 10 W • Dimensions (approx.): 270 × 38.5 × 209 mm (width/height/depth) incl. projecting parts • Mass (approx.): 950 g • Operating temperature: 5 °C to 35 °C • Operating humidity: 25% to 80%

Supplied accessories • Audio/Video cord (1) • Remote commander (remote) (1) • R6 (size AA) batteries (2) Specifications and design are subject to change without notice.

9GB

LANGUAGE CODE LIST 1 GB (page 6), ES (page 6) Code Language

Code Language

Code Language

Code Language

1027 Afar 1028 Abkhazian 1032 Afrikaans 1039 Amharic 1044 Arabic 1045 Assamese 1051 Aymara 1052 Azerbaijani 1053 Bashkir 1057 Byelorussian 1059 Bulgarian 1060 Bihari 1061 Bislama 1066 Bengali; Bangla 1067 Tibetan 1070 Breton 1079 Catalan 1093 Corsican 1097 Czech 1103 Welsh 1105 Danish 1109 German 1130 Bhutani 1142 Greek 1144 English 1145 Esperanto 1149 Spanish 1150 Estonian 1151 Basque 1157 Persian 1165 Finnish 1166 Fiji 1171 Faroese 1174 French 1181 Frisian

1183 Irish 1186 Scots Gaelic 1194 Galician 1196 Guarani 1203 Gujarati 1209 Hausa 1217 Hindi 1226 Croatian 1229 Hungarian 1233 Armenian 1235 Interlingua 1239 Interlingue 1245 Inupiak 1248 Indonesian 1253 Icelandic 1254 Italian 1257 Hebrew 1261 Japanese 1269 Yiddish 1283 Javanese 1287 Georgian 1297 Kazakh 1298 Greenlandic 1299 Cambodian 1300 Kannada 1301 Korean 1305 Kashmiri 1307 Kurdish 1311 Kirghiz 1313 Latin 1326 Lingala 1327 Laothian 1332 Lithuanian 1334 Latvian; Lettish 1345 Malagasy

1347 Maori 1349 Macedonian 1350 Malayalam 1352 Mongolian 1353 Moldavian 1356 Marathi 1357 Malay 1358 Maltese 1363 Burmese 1365 Nauru 1369 Nepali 1376 Dutch 1379 Norwegian 1393 Occitan 1403 (Afan)Oromo 1408 Oriya 1417 Punjabi 1428 Polish 1435 Pashto; Pushto 1436 Portuguese 1463 Quechua 1481 RhaetoRomance 1482 Kirundi 1483 Romanian 1489 Russian 1491 Kinyarwanda 1495 Sanskrit 1498 Sindhi 1501 Sangho 1502 SerboCroatian 1503 Singhalese 1505 Slovak 1506 Slovenian

1507 Samoan 1508 Shona 1509 Somali 1511 Albanian 1512 Serbian 1513 Siswati 1514 Sesotho 1515 Sundanese 1516 Swedish 1517 Swahili 1521 Tamil 1525 Telugu 1527 Tajik 1528 Thai 1529 Tigrinya 1531 Turkmen 1532 Tagalog 1534 Setswana 1535 Tonga 1538 Turkish 1539 Tsonga 1540 Tatar 1543 Twi 1557 Ukrainian 1564 Urdu 1572 Uzbek 1581 Vietnamese 1587 Volapük 1613 Wolof 1632 Xhosa 1665 Yoruba 1684 Chinese 1697 Zulu 1703 Not specified

ISO 639: 1988 (E/F) standard

PARENTAL CONTROL AREA CODE LIST 1 GB (page 4), ES (page 4) Code Area

Code Area

Code Area

Code Area

2044 Argentina 2047 Australia 2046 Austria 2057 Belgium 2070 Brazil 2079 Canada 2090 Chile 2092 China 2115 Denmark

2165 Finland 2174 France 2109 Germany 2248 India 2238 Indonesia 2254 Italy 2276 Japan 2304 Korea 2363 Malaysia

2362 Mexico 2376 Netherlands 2390 New Zealand 2379 Norway 2427 Pakistan 2424 Philippines 2436 Portugal 2489 Russia 2501 Singapore

2149 Spain 2499 Sweden 2086 Switzerland 2528 Thailand 2184 United Kingdom

4-266-030-31(1) Printed in China