SONY
UP-D898MD Instructions for Use
Instructions for Use
31 Pages
Preview
Page 1
4-528-680-11 (1)
Digital Graphic Printer
Instructions for Use Before operating the unit, please read this manual thoroughly and retain it for future reference.
UP-D898MD
© 2014 Sony Corporation
Indication for Use / Intended use The Sony UP-D898MD printer is a compact, medical grade black and white digital printer. It is designed to be integrated into digital radiology imaging systems such as mobile c-arm, ultrasound, cardiac cath lab and other compatible medical imaging systems and produce hard copy prints of still images captured by these systems for the patient record or for referrals. Note
Images printed from the unit cannot be used for diagnostic use. Caution Federal law (United States of America) restricts this device to sale by or on the order of a licensed healthcare practitioner.
Owner's Record
Symbols on the products General warning sign Follow the warnings in the Instructions for Use for parts of the unit on which this mark appears. NOTE Background color: Yellow Triangular band: Black Symbol: Black Consult the Instructions for Use Follow the directions in the Instructions for Use for parts of the unit on which this mark appears. This symbol indicates the manufacturer, and appears next to the manufacturer’s name and address.
The model and serial numbers are located at the bottom. Record these numbers in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product.
This symbol indicates the European Community representative, and appears next to the European Community representative’s name and address.
Model No. ____________________ Serial No. ____________________
This symbol indicates the equipotential terminal which brings the various parts of a system to the same potential.
WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. No modification of this equipment is allowed. THIS APPARATUS MUST BE EARTHED. To disconnect the main power, unplug the power plug. When installing the unit, incorporate a readily accessible disconnect device in the fixed wiring, or connect the power plug to an easily accessible socket-outlet near the unit. Do not position the ME equipment where it is difficult to unplug the power plug. If a fault should occur during operation of the unit, operate the disconnect device to switch the power supply off, or unplug the power plug.
For the customers in the U.S.A. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. All interface cables used to connect peripherals must be shielded in order to comply with the limits for a digital device pursuant to Subpart B of part 15 of FCC Rules. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device maynot cause harmful interference, and (2) this device must accept any interference received,
2
including interference that may cause undesired operation.
3. The leakage current could increase when connected to other equipment.
For the customers in Canada
4. For this particular equipment, all accessory equipment connected as noted above, must be connected to mains via an additional isolation transformer conforming with the construction requirements of IEC60601-1 and providing at least Basic Insulation.
CAN ICES-3 (A)/NMB-3(A) This unit has been certified according to Standard CAN/ CSA-C22.2 No.60601-1.
Important safeguards/notices for use in the medical environments 1. All the equipments connected to this unit shall be certified according to Standard IEC60601-1, IEC60950-1, IEC60065 or other IEC/ISO Standards applicable to the equipments. 2. Furthermore all configurations shall comply with the system standard IEC60601-1-1. Everybody who connects additional equipment to the signal input part or signal output part configures a medical system, and is therefore, responsible that the system complies with the requirements of the system standard IEC60601-1-1. If in doubt, consult the qualified service personnel.
5. This equipment generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance with the instruction manual, it may cause interference to other equipment. If this unit causes interference (which can be determined by unplugging the power cord from the unit), try these measures: Relocate the unit with respect to the susceptible equipment. Plug this unit and the susceptible equipment into different branch circuit. Consult your dealer. (According to standard IEC606011-2 and CISPR11, Class B, Group 1)
Important EMC notices for use in the medical environments • The UP-D898MD needs special precautions regarding EMC and needs to be installed and put into service according to the EMC information provided in this instructions for use. • The portable and mobile RF communications equipment such as cellular phones can affect the UP-D898MD.
Warning The use of accessories and cables other than those specified, with the exception of replacement parts sold by Sony Corporation, may result in increased emissions or decreased immunity of the UP-D898MD.
Guidance and manufacturer’s declaration-electromagnetic emissions The UP-D898MD is intended for use in the electromagnetic environment specified below. The customer or the user of the UP-D898MD should assure that it is used in such an environment. Emission test
Compliance
Electromagnetic environment-guidance
Group 1
The UP-D898MD uses RF energy only for its internal function. Therefore, its RF emissions are very low and are not likely to cause any interference in nearby electronic equipment.
RF emissions CISPR 11 RF emissions Class B CISPR 11 Harmonic emissions
The UP-D898MD is suitable for use in all establishments, including domestic establishments and those directly connected to the public low-voltage power supply network that supplies buildings used for domestic purposes.
Class A IEC 61000-3-2 Voltage fluctuations/ flicker emissions
Complies
IEC 61000-3-3 Warning If the UP-D898MD should be used adjacent to or stacked with other equipment, it should be observed to verify normal operation in the configuration in which it will be used.
3
Guidance and manufacturer’s declaration - electromagnetic immunity The UP-D898MD is intended for use in the electromagnetic environment specified below. The customer or the user of the UP-D898MD should assure that it is used in such as environment. Immunity test Electrostatic discharge (ESD)
IEC 60601 test level
Compliance level
Electromagnetic environment-guidance
±6 kV contact
±6 kV contact
±8 kV air
±8 kV air
Floors should be wood, concrete or ceramic tile. If floors are covered with synthetic material, the relative humidity should be at least 30%.
Electrical fast transient/burst
±2 kV for power supply lines
±2 kV for power supply lines
Mains power quality should be that of a typical commercial or hospital environment.
IEC 61000-4-4
±1 kV for input/ output lines
±1 kV for input/ output lines
Surge
±1 kV differential mode
±1 kV differential mode
±2 kV common mode
±2 kV common mode
< 5% UT (> 95% dip in UT) for 0.5 cycle
< 5% UT (> 95% dip in UT) for 0.5 cycle
40% UT (60% dip in UT) for 5 cycles
40% UT (60% dip in UT) for 5 cycles
70% UT (30% dip in UT) for 25 cycles
70% UT (30% dip in UT) for 25 cycles
< 5% UT (> 95% dip in UT) for 5 sec
< 5% UT (> 95% dip in UT) for 5 sec
3 A/m
3 A/m
IEC 61000-4-2
Mains power quality should be that of a typical commercial or hospital environment.
IEC 61000-4-5
Voltage dips, short interruptions and voltage variations on power supply input lines IEC 61000-4-11
Power frequency (50/60 Hz) magnetic field
Mains power quality should be that of a typical commercial or hospital environment. If the user of the UP-D898MD requires continued operation during power mains interruptions, it is recommended that the UP-D898MD be powered from an uninterruptible power supply or a battery.
Power frequency magnetic fields should be at least characteristic of a typical location in a typical commercial or hospital environment.
IEC 61000-4-8 NOTE: UT is the a.c. mains voltage prior to application of the test level.
4
Guidance and manufacturer’s declaration - electromagnetic immunity The UP-D898MD is intended for use in the electromagnetic environment specified below. The customer or the user of the UP-D898MD should assure that it is used in such as environment. Immunity test
IEC 60601 test level
Compliance level
Electromagnetic environment-guidance Portable and mobile RF communications equipment should be used no closer to any part of the UP-D898MD, including cables, than the recommended separation distance calculated from the equation appliance to the frequency of the transmitter. Recommended separation distance
Conducted RF
3 Vrms
IEC 61000-4-6
150 kHz to 80 MHz
Radiated RF
3 V/m
IEC 61000-4-3
80 MHz to 2.5 GHz
3 Vrms
d = 1.2 √P
3 V/m
d = 1.2 √P 80 MHz to 800 MHz d = 2.3 √P 800 MHz to 2.5 GHz Where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer and d is the recommended separation distance in meters (m). Field strengths from fixed RF transmitters, as determined by an electromagnetic site survey, a should be less than the compliance level in each frequency range. b Interference may occur in the vicinity of equipment marked with following symbol:
NOTE 1: At 80 MHz and 800 MHz, the higher frequency range applies. NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people. a Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the UP-D898MD is used exceeds the applicable RF compliance level above, the UP-D898MD should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as reorienting or relocating the UP-D898MD. b Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.
5
Recommended separation distances between portable and mobile RF communications equipment and the UP-D898MD The UP-D898MD is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the UP-D898MD can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (Transmitters) and the UP-D898MD as recommended below, according to the maximum output power of the communications equipment. Rated maximum output power of transmitter W
Separation distance according to frequency of transmitter m 150 kHz to 80 MHz d = 1.2 √P
80 MHz to 800 MHz d = 1.2 √P
800 MHz to 2.5 GHz d = 2.3 √P
0.01
0.12
0.12
0.23
0.1
0.38
0.38
0.73
1
1.2
1.2
2.3
10
3.8
3.8
7.3
100
12
12
23
For transmitters rated a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer. NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies. NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.
Caution When you dispose of the unit or accessories, you must obey the law in the relative area or country and the regulation in the relative hospital.
Warning on power connection Use a proper power cord for your local power supply. 1. Use the approved Power Cord (3-core mains lead) / Appliance Connector / Plug with earthing-contacts that conforms to the safety regulations of each country if applicable. 2. Use the Power Cord (3-core mains lead) / Appliance Connector / Plug conforming to the proper ratings (Voltage, Ampere). If you have questions on the use of the above Power Cord / Appliance Connector / Plug, please consult a qualified service personnel.
Warning on power connection for medical use Please use the following power supply cord. With connectors (plug or female) and cord types other than those indicated in this table, use the power supply cord that is approved for use in your area. United States and Canada Plug Type
HOSPITAL GRADE*
Cord Type
Min.Type SJT Min.18 AWG
Minimum Rating for Plug and Appliance Couplers
10 A/125 V
Safety Approval
UL Listed and CSA
*Note: Grounding reliability can only be achieved when the equipment is connected to an equivalent receptacle marked ‘Hospital Only’ or ‘Hospital Grade’.
For the customers in Europe This product has been manufactured by or on behalf of Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 1080075 Japan. Inquiries related to product compliance based on European Union legislation shall be addressed to the authorized representative, Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters, please refer to the addresses provided in the separate service or guarantee documents.
6
Disposal of Old Electrical & Electronic Equipment (Applicable in Republic of India) India only
For the customers in the U.S.A. SONY LIMITED WARRANTY - Please visit http:// www.sony.com/psa/warranty for important information and complete terms and conditions of Sony’s limited warranty applicable to this product.
This symbol indicates that this product shall not be treated as household waste and may not be dropped in garbage bins. Product owners are advised to deposit their product at the nearest collection point for the recycling of electrical and electronic equipment. Your co-operation shall facilitate proper disposal & help prevent potential negative consequences/hazards to the environment and human health, which could otherwise be caused by inappropriate waste disposal including improper handling, accidental breakage, damage and/ or improper recycling of e-waste. The recycling of materials will help to conserve natural resources.
SONY LIMITED WARRANTY - Please visit http:// www.sonybiz.ca/solutions/Support.do for important information and complete terms and conditions of Sony’s limited warranty applicable to this product.
For more detailed information about recycling of this product, please contact your local civic office, your household waste disposal service provider or the store where you made the purchase. You may contact our company’s toll free number in India for assistance.
For the customers in Korea
This product complies with the “India E-waste Rule 2011”.The E-waste Rules, 2011 is an Indian directive aimed at reducing the harmful environmental impact of waste electrical equipment by restricting the use of known hazardous substances. As of 1st May 2012, new electrical and electronic equipment introduced into the market may no longer contain the following chemicals or its specified maximum concentration levels: Lead, Mercury, Hexavalent Chromium, Polybrominated Biphenyls (PBB) or Polybrominated Diphenylethers (PBDE) - in concentrations exceeding 0.1 weight % and Cadmium - 0.01 weight %, except of exemptions set in Schedule 2 of the aforesaid Rule.
For the customers in Canada
For the customers in Europe Sony Professional Solutions Europe - Standard Warranty and Exceptions on Standard Warranty. Please visit http://www.pro.sony.eu/warranty for important information and complete terms and conditions.
SONY LIMITED WARRANTY - Please visit http:// bpeng.sony.co.kr/handler/BPAS-Start for important information and complete terms and conditions of Sony’s limited warranty applicable to this product.
7
Table of Contents Getting Started Overview ... 9 Location and Function of Parts and Controls ... 9 Front Panel ... 9 Rear Panel ... 10 Connections ... 10 Connecting to the USB Connector ... 11 Installing the Printer Driver to the Computer ... 11 Paper ... 11 Paper You Can Use ... 11 Loading Paper ... 12
Operation Adjustments and Settings Using the Menu ... 15 Menu Flow ... 15 Menu List ... 16 Basic Menu Operations ... 18 Registering Menu Settings ... 19 Printing the Menu List ... 19 Printing ... 20 Starting a Print Job ... 20 Cutting the Printed Paper ... 21 Canceling a Print Job ... 21 Making Copies of the Last Printout ... 21 Feeding Paper ... 21 Adjusting the Contrast and Brightness ... 22
Others Precautions ... 23 On Safety ... 23 On the Printer Carriage ... 23 On Installation ... 23 Maintenance ... 24 Cleaning the Cabinet ... 24 Cleaning the Thermal Head ... 24 Cleaning the Platen Roller ... 25 Specifications ... 26 Troubleshooting ... 28 Error Messages ... 29 License ... 29 Index ... 30
8
Getting Started
Quiet, high quality, fast printing • A thin-film thermal head with a built-in high speed drive IC is equipped, and printing high resolution images of 12.8 dots/mm is available. • High quality image (960 × 1280 dots) printing is available in approx. 1.9 seconds per print when printing at high speed. • Standard memory for image is capable of printing images up to 4096 × 1280 dots (approx. 320 × 100 mm). • Monochrome printing with up to 256 shades of gradation is available. • Built-in temperature correction circuits prevent temperature changes which could cause blurred prints.
For more details, see the referenced page numbers enclosed in parentheses ( ).
Getting Started
Overview
Location and Function of Parts and Controls
Front Panel
USB interface The unit is equipped with a USB connector which complies with the Hi-Speed USB (USB 2.0). Easy printer settings using a menu You can make up the settings to meet your requirements using a menu. You can store up to three settings as a set of user settings.
A ! Power ON/OFF switch (13, 18, 20, 24) Press the switch to ON to turn the power on. The back light on the LCD lights in green. Note
When the switch is turned off or when turning the main power off then on again, wait about five seconds and turn on the unit.
Easy paper loading Free access to the door panel allows you to drop paper into the unit for easy loading.
B Printer window display (LCD: liquid crystal display) (15, 20) The back light lights in green when the unit operates normally. If an error occurs, the back light lights in orange and a corresponding alarm message is displayed. During menu operations, menu items and settings are displayed. C Menu lever (18, 24) Use to make menu operations. D
CONTRAST control (22) Adjust the contrast of the printouts.
E
BRIGHT (brightness) control (22) Adjust the brightness of the printouts.
F
FEED button (14, 21) Hold down to feed paper. While a print job is in progress, press to cancel the print job.
Overview / Location and Function of Parts and Controls
9
G
COPY button (21) Press to print another copy of the previous printout. You can make only one copy each time you press this button regardless of the print quantity set using the menu.
Getting Started
H
OPEN button (13, 21) Press to open the door panel. While a print job is in progress, press to cancel the print job.
I
Paper cutter Cuts the paper as each image is printed.
Rear Panel
Connections After connecting the USB cable (sold separately) to the unit and the computer, connect the power cord. For details about the unit connection, refer to the manuals for the computer or other peripheral devices.
Warning
Using this unit for medical purposes This equipment's connectors are not isolated. Do not connect any device other than one which conforms to IEC60601-1. When an information technology device or AV device that uses an alternating current is connected, current leakage may result in an electric shock to the patient or operator. If use of such a device is unavoidable, isolate its power supply by connecting an isolation transformer, or by connecting an isolator between the connecting cables. After implementing these measures, confirm that the reduced risk now conforms to IEC60601-1. Notes
A
USB connector (11) Connects to a computer equipped with the USB interface, using a USB cable compatible with HiSpeed USB (sold separately).
B
Equipotential ground terminal connector Used to connect to the equipotential plug to bring the various parts of a system to the same potential. Refer to “Important safeguards/notices for use in the medical environments” (page 3).
C - AC IN connector Use a specified power cord. Refer to “Warning on power connection” (page 6) and “Warning on power connection for medical use” (page 6).
10
Connections
• Before connecting the unit to the computer, turn off the unit, computer, monitor, and all peripheral devices connected to the computer. • Before connecting the unit to the computer, disconnect the power cord from the unit. Connect the power cord to the unit only after connecting the unit and the computer. • Follow the connection procedures described in the computer manual. • Make sure that the cables are connected securely at both ends. • The unit drive software provided with the unit is not suitable for using the unit connected to a network. • Printer operation is not guaranteed when connecting to the computer using the USB cable via a hub. • Two or more units cannot be connected to a single computer.
Connecting to the USB Connector UP-D898MD
USB connector USB cable (sold separately)
Use only Sony UPP-110S/110HD/110HG paper designed for use with this unit. High print quality cannot be guaranteed if any other paper is used with this unit, and such paper could damage the unit. You cannot use the UPP-110HA as specified for the UP-D890 series printer.
Getting Started
to
Paper
Paper You Can Use Print paper characteristics are as follows. Print Characteristics
Paper Type
TYPE I (Normal)
UPP-110S
TYPE II (High Density)
UPP-110HD
TYPE V (High Glossy)
UPP-110HG
Notes on storing and handling paper
Installing the Printer Driver to the Computer When you use Windows XP/Windows Vista: After connecting this unit to the computer, turn on this unit. For installing, see the Install Guide of the supplied CD-ROM and the Readme file. When you use Windows 7/8: Before connecting this unit to the computer, install the supplied printer driver to the computer. For installing, see the Install Guide of the supplied CD-ROM and the Readme file. Note
When this unit is turned on, do not make the computer which is connected to this unit standby (suspended) or pause mode. It may occur the malfunction.
Do not re-use Doing so may result in malfunction and negatively affect printing results. Storing unused paper • Store unused paper at a temperature below 30°C (86°F) in a dry location that is not exposed to direct sunlight. • Do not store unused paper near volatile liquids or allow the paper to contact any organic volatile liquid, cellophane tape, or any compound of vinyl chloride. Loading paper • Handle the paper carefully when loading not to touch the printing surface with your fingers. Inspection gel, fingerprints or perspiration could cause pictures to blur. • After removing the label from the leading edge of the paper, pull the paper out 15 - 20 cm (6 - 8 in) before printing. Label adhesive remaining on the paper could spoil a picture. • If you reuse paper that has been removed once, pull out 15 – 20 cm (6 – 8 in) before printing. If the dust, etc. exists, it could spoil a picture. Storing printouts • To prevent printouts from fading or changing color, store them in a cool, dry location where the temperature is not higher than 30°C (86°F). • Store printouts in a polypropylene pouch or between sheets of paper that contain no plastic. • Do not store printouts where they will be exposed to direct sunlight or high humidity. • Do not store printouts near volatile liquids or allow the prints to contact any organic volatile liquid, cellophane tape, or any compound of vinyl chloride. • To prevent fading, do not stack printouts on or under a diazo copy sheet.
Paper
11
• To mount printouts on another sheet of paper, use double-sides tape or a water base adhesive. • Do not incinerate waste printer paper.
Loading Paper When loading paper, make sure to follow the notes of the symbols on the unit.
Getting Started
Caution
A paper cutter is mounted in the unit. When cleaning the thermal head, be careful not to touch the paper cutter. Touching the paper cutter may cause injury. Caution
Do not insert your finger into the back of the paper tray. Your finger may become stuck in an internal gap, which may lead to injury. Caution Do not touch any unit circuitry and the patient at the same time. If the unit malfunctions, it may generate voltage that could be harmful to the patient. Notes
• Before loading paper in the unit, see “Notes on storing and handling paper” (page 11). • Always handle paper carefully when loading to avoid adversely affecting the quality of the printouts. Never bend or crease the paper and never touch the printing surface with your fingers. Inspection gel, fingerprints or perspiration could cause pictures to blur. • Do not use any paper other than UPP-110S/110HD/ 110HG paper. (page 11) • Be sure to set “-PP.TYPE” of the “CONFIG.” menu to the paper to be used. (page 17) You can confirm the media currently selected on the LCD. For detailed information on how to confirm, see “Paper currently selected” (page 21). Caution
A paper cutter is mounted in the unit. When loading paper, be careful not to touch the paper cutter. Touching the paper cutter may cause injury.
12
Loading Paper
1
Press the power ON/OFF switch to on. When paper is not loaded yet, the back light on the LCD lights in orange and the message “EMPTY” is displayed. Getting Started
2
Press the OPEN button to open the door panel.
3
Remove the label from the leading edge of the paper, pull out about 15 - 20 cm (6 - 8 in) of the paper, and then set the paper roll in the paper tray.
Load the paper with the printing side (heat sensitive side) up. Printing is not possible if the paper is reversed.
Note
When installing/removing the paper to/from the paper tray, be careful not to drop the paper or put the paper on desk, etc., with the surface of the paper facing downward.
Make sure that the paper is set straight.
Remove label and pull out 15 - 20 cm (6 - 8 in).
Loading Paper
13
4
Close the door panel by pushing it.
Getting Started
Notes
• Make sure that the paper is loaded straight. If it is skewed, this could cause the paper to jam. • If you did not pull out enough paper in step 3, press the FEED button to feed some more paper out of the unit without pulling out the paper.
14
Loading Paper
Operation
Adjustments and Settings Using the Menu Operation
You can carry out adjustments and settings to meet your requirements. Those settings and adjustments are retained even if the unit is turned off. You can set up the unit according to its intended purpose, connected equipments or your individual preferences. You can store up to three settings as a set of user settings.
Menu Flow The contents displayed on the LCD change in sequence as you operate the menu lever, as shown in the following menu flow chart, and you can make the settings for each menu item.
Adjustments and Settings Using the Menu
15
Menu List This section describes the menus displayed as you operate the menu lever. The setting surrounded by indicates the default setting.
Operation
Item
Function
HISTORY
Displays up to five recently used menus according to the menu operation history. “NO ITEM” is displayed as the default.
PRT.HELP
Prints description of operation method. (English only)
ADJUST
DIGITAL
Displays menu of settings to print from computer.
-LIST
Prints list of operating instructions.
-HELP.1
Prints instructions of “Contrast and Brightness Control.”
-HELP.2
Prints instructions of “Print direction and feed control.”
-BRIGHT
Adjusts brightness of printouts. You can set between –64 -- [0] -- +64.
-CONTRA
Adjusts contrast of printouts. You can set between –64 -- [0] -- +64.
-GAMMA
Select the type of gamma. When “P.TYPE:S” of the “-PP.TYPE” is selected, GAMA: 1 is fixed. GAMA4: Softest gradation GAMA3: Hard gradation [GAMA2]: Standard GAMA1: Soft gradation
-SHARP
Adjusts the sharpness of the printout to any of 15 levels, from [0] to 14. The outline of the printout is most emphasized at the setting of 14 and no emphasis at the setting of “0” (default value).
-TONE
Adjusts density of the half tone. You can set between –32 -- [0] -- +32.
-DRIVER
Select the printer driver to use for this unit. [DRV:898]: Use the driver for UP-X898MD, UP-D898MD. DRV:897: Use the driver for UP-D897.
-RESIZE
Select whether or not the image is enlarged. [RSIZ:OFF]: Prints the image at its original size. RSIZ:ON: Prints the image at a larger size, according to the paper size set by the printer driver.
MENU:OK
Prints by pushing the menu lever.
PRT.MENU
Prints current settings by menu list.
PREF.
Displays menu to set printout -BACWRD a) Select whether the top or bottom of the screen is to be printed first. BACW:ON: Starts to print in the reverse direction (from the top of the conditions. screen). [BACW:OFF]: Starts to print in the normal direction (from the bottom of the screen).
CLEAN.TH
16
Displays menu for adjusting image quality.
Settings
Starts head cleaning.
Adjustments and Settings Using the Menu
-INFO
Select whether the print conditions are to be printed under image. [INFO:OFF]: Does not print information. INFO:ADJ: Prints image quality adjustment value.
-INVERT
Set the printout to either positive printout or negative printout. INV:NEG: Makes negative printouts. [INV:POS]: Makes normal printouts.
-MIRROR
Prints image inverting right and left. MIRR:ON: Inverts right and left of image. [MIRR:OFF]: Does not invert image.
-QTY
Set the print quantity. QTY: [1] -- 10: You can make 1 -- 10 copies of the same printout.
CLEAN:OK
Starts the head cleaning by pushing the menu lever.
Function
Settings
Displays settings for operation.
-AUT.LCK
Select whether to lock BRIGHT control and CONTRAST control automatically. ALCK:ON: Always lock automatically. Unlock by pushing and holding the menu lever for three seconds on STANDBY. The controls are locked after ten seconds of no operation. [ALCK:OFF]: Does not lock automatically. Lock/unlock the controls by pushing and holding the menu lever for three seconds.
-BEEP
Select whether the operation tone sounds. Error tones sound regardless of the setting. BEEP:OFF: The operation tone does not sound. [BEEP:ON]: The operation tone sounds.
-BLANK
Adjust the blank space length. BLANK:L: Lengthens the blank space. [BLANK:S]: Shortens the blank space. Adjust the length of the top blank space (BACW:OFF) or the bottom blank space (BACW:ON).
-FEED
To select the paper feed length to be used after printing. [FEED:ON]: Feeds extra blank paper between prints. FEED:OFF: Feeds less paper between prints to conserve paper, or when printing multiple pictures on the same sheet without cutting. More pictures can be printed on one roll when there is only a little space between printed pictures. Feed the desired length of the paper to leave a margin, using the FEED button before cutting the paper.
-RESET
Resets the menu items to the default setting (initialization). [RESET:OK]: Resets the settings to the default.
-PP.TYPE
Select paper to use. [P.TYPE:HG]: Use UPP-110HG. P.TYPE:HD: Use UPP-110HD. P.TYPE:S: Use UPP-110S.
-LOAD
Loads the registered menu settings. LOAD:3: Loads the “SAVE:3” settings registered using the SAVE menu item. LOAD:2: Loads the “SAVE:2” settings registered using the SAVE menu item. [LOAD:1]: Loads the “SAVE:1” settings registered using the SAVE menu item.
-SAVE
Register up to three settings. SAVE:3: Registers the menu settings as No. 3. SAVE:2: Registers the menu settings as No. 2. [SAVE:1]: Registers the menu settings as No. 1.
-SPEED
Select the printing speed. When you use the UPP-110HD paper, you cannot select HI (high speed printing). [HI]: Prints at high speed. NOR: Prints at the normal speed.
SERIAL.N
Operation
Item CONFIG.
Displays serial numbers of the product.
a) The printing direction is as follows.
When “BACW:OFF” is selected
When “BACW:ON” is selected
Adjustments and Settings Using the Menu
17
Basic Menu Operations
6
Push the menu lever or shift it to the right.
This section describes the basic menu operations which are common to each menu, taking settings for printing direction as an example.
1
Press the power ON/OFF switch to on. The back light on the LCD lights in green.
LCD Operation
2
The unit enters the mode in which you can select the printing direction. “BACW:OFF,” which is the default setting, is displayed on the LCD. “BACW:OFF” is the currently selected setting. In this menu operation, you will change the setting to “BACW:ON.”
Confirm that “READY” is displayed on the LCD, and push the menu lever.
7
Display “BACW:ON” by shifting the menu lever up, and then push the menu lever.
The unit enters the menu mode. Menu item is displayed on the LCD.
3
Display “PREF.” by shifting the menu lever up or down.
“BACW:ON” is registered as the printing direction. “-BACWRD” is displayed on the LCD. Note
18
4
Push the menu lever or shift it to the right. The unit enters the menu mode in which you can set printing condition. The menus have “-” in front of their name.
5
Display “-BACWRD” by shifting the menu lever up or down.
Adjustments and Settings Using the Menu
If about 20 seconds elapse without making any menu operation after you have displayed the menu item or setting, the display returns to “READY” on the LCD and the unit exits the menu mode. In such a case, the setting of “-BACWRD” is not changed.
Confirm that “READY” is displayed on the LCD, and push the menu lever.
2
Display “CONFIG.” by shifting the menu lever up or down, and then push the menu lever or shift it to the right.
To end the menu operations Display “READY” by shifting the menu lever to the left after step 7. The unit exits the menu mode.
3
Display “-LOAD” by shifting the menu lever up or down, and then push the menu lever or shift it to the right. The number is displayed, such as “LOAD:1.”
Menu lock function If the message “LOCK” is displayed and you hear the alarm sound when you push the menu lever, the menu lever is disabled because the menu operation function is locked. If you want to perform a menu operation, contact the nearest authorized dealer.
4
Select the desired number of setting content by shifting the menu lever up or down, and then push the menu lever. The setting of the number selected is loaded.
To continue menu operations Make settings by repeating steps 3 to 7.
Registering Menu Settings You can store up to three sets of settings made using the menu, and you can load the desired setting when needed. The unit retains these settings even if you turn off the power. Note
When you use the unit for the first time after you purchase it, factory settings are registered in all three of the stored selections.
Registering new settings
1
Make all of the required settings.
2
Display “CONFIG.” by shifting the menu lever up or down, and then push the menu lever or shift it to the right. The unit enters the menu in which you can make setting for printer operation.
3
4
Display “-SAVE” by shifting the menu lever up or down, and then push the menu lever or shift it to the right. The number is displayed like “SAVE:1.” Select the desired number by shifting the menu lever up or down, and then push the menu lever. The value set in step 1 is registered to the number selected.
When you change the loaded settings The unit operates according to the changed settings. In this case, the unit operates according to these settings until you load another set of settings, even if you turn off the unit. When you load another group of settings, the settings loaded previously are cleared. To retain previously loaded settings Example: Settings registered as setting 1 are loaded and settings are to be changed. To retain the original settings of setting 1 and to register the new settings as setting 2, proceed as follows.
1
Load the settings of “LOAD:1” following the procedure for loading the desired settings.
2
Change the loaded settings as required.
3
Select “SAVE:2” following procedure for registering the settings.
4
Push the menu lever. The settings, changed in step 2, are registered as “SAVE:2.”
Printing the Menu List You can make a printout of the current menu settings.
1
Push the menu lever. The menu item is displayed and the unit enters menu mode.
2
Display “PRT.MENU” by shifting the menu lever up or down, and then push the menu lever or shift it to the right.
3
Confirm “MENU:OK” is displayed, and then push the menu lever. The unit starts printing the current menu settings.
Loading the desired settings You can load the desired settings and make printouts with the loaded settings.
Operation
1
To cancel the setting Go back to step 3 or 5 by shifting the menu lever to the left in step 7.
Adjustments and Settings Using the Menu
19
“PRT.MENU” is displayed on the LCD.
4
Shift the menu lever to the left. “READY” is displayed and the unit enters the normal printing mode.
Printing Before starting a print job, always check the following points: • Unit connected correctly? (page 11) • Printer driver installed? (page 11) • Paper loaded correctly? (page 12) • Menu settings and adjustments done correctly? (page 15)
Operation
Starting a Print Job
1
Press the power ON/OFF switch to on. The back light on the LCD lights in green, and “READY” is displayed on the LCD.
LCD
2
Execute the print job with the software application.
When the message is displayed on the LCD If a problem occurs, the back light on the LCD lights in orange and the error message stating the problem is displayed on the LCD. Message
Cause and remedy
EMPTY:XX
Paper is not loaded. Load paper.
DOOR:XX
The door is open. Close the door.
XX indicates the selected paper type. “S” means UPP-110S, “HD” means UPP-110HD, and “HG” means UPP-110HG. When the unit stops printing When printing almost black images continuously, the thermal head protection circuit may shut down the unit to prevent the thermal head from overheating. In such a case, the message “COOLING” is displayed on the LCD. Leave the unit until the head cools down and this message disappears.
20
Printing