UAB Vitacon LT

VitaScan LT Quick Start Oct 2015

Quick Start

2 Pages

Install & Setup the Software  1  If you purchased a Tablet from Vitacon US, the software is pre-installed and will automatically launch when turning on the system. Otherwise, install the VitaScan software using the USB Stick provided.  2  Select Options 1. 2. 3.  Launch the software Select Gender (Default Female) Select Scan Depth (Default 16cm)  Connect the scanner to local Wi-Fi to print wirelessly to existing printers or if you wish to save Scans on a local area network. Launch the software and select Setup to add your facility name.      Position the Probe  3  Proper probe position is essential for a good measurement: 1. 2. 3. 4. 5.  Place patient in the supine position (lying on the back, face upward). Find the midline position on the patient’s lower abdomen. Palpate the pubis bone. Apply ultrasound gel on the probe head or on the patient’s abdomen (walnut size amount recommended). Place the probe head one inch above the pubis bone on the midline with the red label facing upward.  1”  Pubis Bone  Bladder Pubis Bone  4  Locate and Scan the Bladder 1. 2.  3.  Select Start or press and release the device button to locate the bladder. Angle the probe so that the bladder takes up the largest area on the screen and the green line is in the middle of the bladder and around the bladder border. Keep this angle and select Scan or press and release the device button to make the measurement. Hold steady until two static images appear on screen (approximately 3 seconds).  While scanning, avoid making any changes in the position, angle or pressure of the scan probe.  VITACON US 600 Twelve Oaks Center Drive, Suite 685, Wayzata MN 55391 (800) 757-8450 | |  Rev 10/07/2015
File Type: PDF
File Size: 602 KB
File Name: vitascan_lt_quick_start.pdf

By clicking Download you are confirming this is the correct document for your purposes
and that you agree to our Terms & Conditions