S-NW foot control Quick Guide Rev. 001 Oct 2020

Quick guide for foot control S-NW CAN-Dongle Pairing The foot control S-NW and the CAN dongle are paired by default.

SPI-Dongle Pairing The foot control S-NW and the CAN dongle are paired by default.

Connecting CAN dongle

Connecting and disconnecting the SPI dongle Pay attention to the positioning!

 Plug in the CAN dongle. Pay attention to the positioning!

Removing CAN dongle

 Press the side lock and remove the CAN dongle.

CAN dongle activated Icon visible on display > CAN dongle inserted > Control unit switched on > Foot control actuated

 Plug in the SPI dongle or disconnect the SPI dongle from the control unit.

 Attach the SPI dongle to the irrigant support or remove the SPI dongle from the irrigant support.

GREEN – SPI dongle activated LED on if the SPI dongle is connected and the control unit is switched on. ORANGE – battery LED flashes if the batteries on the foot control need to be replaced. BLUE – pairing

W&H Dentalwerk Bürmoos GmbH Ignaz-Glaser-Straße 53, Postfach 1 5111 Bürmoos, Austria

t + 43 6274 6236-0 f + 43 6274 6236-55 [email protected] wh.com

50915 AEN Rev. 001 / 21.10.2020 Subject to alterations