54 Pages
Preview
Page 1
Instructions for use
Surgical Handpieces S-9, S-10, S-11, S-12, S-15
Contents Symbols... 4 in the Instructions for use...4 on the medical device/packaging...5
1. Introduction... 6 2. Safety notes... 9 3. Product description... 11 4. Operation... 13 Assembly/Removal...13 To change rotary instrument...16 Test run...17
5. Hygiene and maintenance... 18 General notes... 18 Limitations on processing... 20 Initial treatment at the point of use...21
2
Manual cleaning... 22 Manual disinfection... 29 Automated cleaning and disinfection... 30 Drying... 32 Inspection, Maintenance and Testing... 33 Packaging... 40 Sterilization...41 Storage... 44
6. Servicing... 45 7. W&H Accessories and spare parts... 46 8. Technical data... 47 9. Disposal... 50 Explanation of warranty terms... 51 Authorized W&H service partners... 53 3
Symbols
WARNING! (risk of injury)
in the Instructions for use
ATTENTION! (to prevent damage occurring)
General explanations, without risk to persons or objects
Do not dispose of with domestic waste
Caution! Federal law restricts this device to sale by or on the order of a dentist, physician, veterinarian or with the descriptive designation of any other practitioner licensed by the law of the State in which the practitioner practices to use or order the use of the device. 4
Symbols XXXX
on the medical device/packaging
CE marking with identification number of the Notified Body
DataMatrix Code for product information including UDI (Unique Device Identification)
Data structure in accordance with Health Industry Bar Code
Catalogue number
Thermo washer disinfectable
Sterilizable up to the stated temperature
Serial number
Medical Device
UL Component Recognition Mark indicates compliance with Canadian and U.S. requirements
Date of manufacture
5
1. Introduction Customer satisfaction has absolute priority in the W&H quality policy. This medical device has been developed, manufactured and subjected to final inspection according to legal regulations, quality and industry standards. For your safety and the safety of your patients Prior to initial use please read the Instructions for use. These explain how to use your medical device and guarantee a smooth and efficient operation. Observe the safety notes. Intended use Surgical treatment of organic hard tissue. Misuse may damage the medical device and hence cause risks and hazards for patient, user and third parties. 6
Qualifications of the user We have based our development and design of the medical product on the »physician« target group.
Responsibility of the manufacturer The manufacturer can only accept responsibility for the safety, reliability and performance of the medical device when it is used in compliance with the following directions: > The medical device must be used in accordance with these Instructions for use. > The medical device has no components that can be repaired by the user. > Modifications or repairs must only be undertaken by an authorized W&H service partner (see page 53).
7
Skilled application The medical device is intended only for skilled application according to the intended use as well as in compliance with the valid health and safety at work regulations, the valid accident prevention regulations and in compliance with these Instructions for use. The medical device should be prepared for use and maintained by staff who have been trained in procedures for infection control, personal safety and patient safety. Improper use, unauthorized assembly, modification or repair to the medical device, non-compliance with our instructions or the use of accessories and spare parts which are not approved by W&H, invalidates all claims under warranty and any other claims. Any serious incident that has occurred in relation to the medical device should be reported to the manufacturer and the competent authority!
8
2. Safety notes > Before using the medical device for the first time, store it at room temperature for 24 hours. > The operation of the medical device is permitted only on dental units which correspond to the standards IEC 60601-1 (EN 60601-1) and IEC 60601-1-2 (EN 60601-1-2). > Do not activate the chuck lever of the medical device during operation. This leads to detachment of the rotary instrument and/or makes the medical device hot. > Always ensure the correct operating conditions and cooling function. > Always ensure that sufficient and adequate cooling is delivered and ensure adequate suction. > In case of coolant supply failure, the medical device must be stopped immediately. > Check the medical device for damage and loose parts each time before using . > Do not operate the medical device if it is damaged. > Only attach the medical device onto the motor when the motor is at a complete standstill. > Perform a test run each time before using. > Avoid overheating at the treatment site. > Do not touch the soft tissue with the handpiece head (risk of burning)! 9
Hygiene and maintenance prior to initial use > The medical device is sealed in PE film and not sterilized when delivered. > The PE film and the packaging are non-sterilizable. > Clean, disinfect and lubricate the medical device. > Sterilize the medical device, the nozzle cleaner and the coolant tube.
10
3. Product description
S-11, S-15
Handpiece head* Coolant tube (movable) Chuck lever Area of chuck lever Shaft Sheath* Long nozzle cleaner
* Symbols on the parts and = Sheath open = Direction of rotation = Sheath locked 11
3. Product description
S-9, S-10, S-12
Handpiece head* Coolant tube (movable) Chuck lever Area of chuck lever Shaft Knee* Lower shaft Sheath* Long nozzle cleaner
12
* Symbols on the parts , and = Sheath open = Direction of rotation = Sheath locked
4. Operation
Assembly/Removal Coolant tube
Fit the coolant tube. Check the secure hold of the coolant tube and replace it if necessary. or
Pull off the coolant tube.
13
Do not assemble or remove the medical device during operation!
Push the medical device onto the motor. When using a locking pin between motor and medical device: See Instructions for use of the control unit.
Verify full engagement. Remove the medical device.
14
Rotary instruments > Use only rotary instruments which are in perfect condition and pay attention to the direction of rotation of the rotary instrument. Follow the operating instructions of the manufacturer. > Insert the rotary instrument only when the medical device is stationary. > Never touch the rotary instrument while it is still rotating. > Do not activate the chuck lever of the medical device during operation. This leads to detachment of the rotary instrument, damage to the chucking system and/or heating up of the medical device. Risk of burning!
15
To change rotary instrument
Unlock and swivel the chuck lever. Insert the rotary instrument until limit stop. Return the chuck lever to the initial position. Verify full engagement. or
Unlock and swivel the chuck lever. Remove the rotary instrument.
16
Test run Do not hold the medical device at eye level! > Insert the rotary instrument. > Operate the medical device In the event of operating malfunctions (e.g., vibrations, unusual noise, overheating, coolant failure or leakage) stop the medical device immediately and contact an authorized W&H service partner.
17
5. Hygiene and maintenance
General notes
> Follow your local and national laws, directives, standards and guidelines for cleaning, disinfection and sterilization. > Wear protective clothing, safety glasses, face mask and gloves. > Use only oil-free, filtered compressed air with a maximum operating pressure of 3 bar for manual drying.
18
Cleaning agents and disinfectants > Read the notes, follow the instructions and heed the warnings provided by the manufacturers of cleaning agents and/or disinfectants. > Use only detergents which are intended for cleaning and/or disinfecting medical devices made of metal and plastic. > It is imperative to comply with the concentrations and exposure times specified by the manufacturer of the disinfectant. > Use disinfectants which have been tested and found effective by the Verbund für Angewandte Hygiene e.V. (VAH = Association for Applied Hygiene), the Österreichische Gesellschaft für Hygiene, Mikrobiologie und Präventivmedizin (ÖGHMP = Austrian Society for Hygiene, Microbiology and Preventive Medicine), the Food and Drug Administration (FDA) and the U.S. Environmental Protection Agency (EPA). The user is responsible for validating its process if the specified cleaning agents and disinfectants are not available.
19
Hygiene and maintenance
Limitations on processing
The product lifetime and the medical device’s ability to operate correctly are mainly determined by mechanical stress during use and chemical influences due to processing. > Send worn or damaged medical devices and/or medical devices with material changes to an authorized W&H service partner. Processing cycles > We recommend a regular service for the W&H medical device after 500 processing cycles or one year.
20